THEFT DETERRENT SYSTEM

DTC Code DTC Name
HOW TO PROCEED WITH TROUBLESHOOTING

CAUTION / NOTICE / HINT

Tip:
  • Use this procedure to troubleshoot the theft deterrent system.

  • *: Use the GTS.

PROCEDURE

  1. VEHICLE BROUGHT TO WORKSHOP

    Result

    Proceed to

    NEXT

    NEXT
  2. CUSTOMER PROBLEM ANALYSIS

    1. Interview the customer to confirm the trouble.

      Click hereClick hereClick hereClick hereClick hereClick hereClick here

    Result

    Proceed to

    NEXT

    NEXT
  3. INSPECT BATTERY VOLTAGE

    1. Measure the battery voltage.

      Standard Voltage

      11 to 14 V

      If the voltage is below 11 V, recharge or replace the battery before proceeding to the next step.

    Result

    Proceed to

    NEXT

    NEXT
  4. SYMPTOM SIMULATION

    Result

    Proceed to

    NEXT

    NEXT
  5. INSPECT COMMUNICATION FUNCTION OF CAN COMMUNICATION SYSTEM*

    1. Use the GTS to check if the CAN communication system is functioning normally.

      Click hereClick hereClick hereClick hereClick hereClick hereClick here

      Result

      Result

      Proceed to

      CAN DTCs are not output

      A

      CAN DTCs are output

      B

    B

    GO TO CAN COMMUNICATION SYSTEM

    A
  6. PROBLEM SYMPTOMS TABLE

    1. Refer to Problem Symptoms Table.

      Click hereClick here

      Result

      Result

      Proceed to

      Fault is not listed in Problem Symptoms Table.

      A

      Fault is listed in Problem Symptoms Table.

      B

    B

    REPAIR OR REPLACEClick here

    A
  7. PERFORM OVERALL ANALYSIS AND TROUBLESHOOTING*

    1. System Description

      Click here

    2. Terminals of ECU

      Click here

    3. Data List / Active Test

      Click here

    Result

    Proceed to

    NEXT

    NEXT
  8. REPAIR OR REPLACE

    Result

    Proceed to

    NEXT

    NEXT
  9. CONFIRMATION TEST

    Result

    Proceed to

    NEXT

    NEXT

    END