FUEL TANK INSTALLATION

PROCEDURE

  1. INSTALL NO. 1 CHARCOAL CANISTER OUTLET HOSE

    1. A176169

      Install the No. 1 charcoal canister outlet hose to the fuel tank assembly and connect the clamp.

  2. INSTALL NO. 1 FUEL EVAPORATION TUBE SUB-ASSEMBLY

    1. A176168C01

      *1

      No. 1 Fuel Evaporation Tube Sub-assembly

      Engage the 2 claws to install the No. 1 fuel evaporation tube sub-assembly to the fuel tank assembly.

  3. INSTALL FUEL TANK MAIN TUBE SUB-ASSEMBLY

    1. A176167C01

      *1

      Fuel Tank Main Tube Sub-assembly

      Engage the 2 claws to install the fuel tank main tube sub-assembly to the fuel tank assembly.

      Tip:

      After installing the fuel tank main tube sub-assembly and No. 1 fuel evaporation tube sub-assembly, check that the fuel tank main tube sub-assembly is positioned above the No. 1 fuel evaporation tube sub-assembly.

  4. INSTALL NO. 4 FUEL TANK CUSHION

    1. Install a new No. 4 fuel tank cushion to the fuel tank assembly.

  5. INSTALL NO. 2 FUEL TANK CUSHION

    1. A289964C01

      *1

      No. 1 Fuel Tank Cushion

      *2

      No. 2 Fuel Tank Cushion

      Install 3 new No. 2 fuel tank cushions as shown in the illustration.

  6. INSTALL NO. 1 FUEL TANK CUSHION

    1. Install a new No. 1 fuel tank cushion as shown in the illustration.

  7. INSTALL FUEL TANK ASSEMBLY

    1. for Sedan:

      1. Support the fuel tank assembly using an engine lifter.

      2. Raise the engine lifter, then set the fuel tank assembly to the vehicle.

        Note:
        • Do not drop the fuel tank assembly.

        • When installing the fuel tank assembly, tilt it slightly to prevent it from interfering with the suspension arm or other surrounding parts.

      3. Tighten the 4 bolts.

        39.2 N*m

        400 kgf*cm

        29 ft.*lbf

    2. except Sedan:

      1. Support the fuel tank assembly and 2 fuel tank bands using an engine lifter.

      2. Raise the engine lifter, then set the fuel tank assembly to the vehicle.

        Note:
        • Do not drop the fuel tank assembly.

        • When installing the fuel tank assembly, tilt it slightly to prevent it from interfering with the suspension arm or other surrounding parts.

      3. Tighten the 4 bolts and 2 fuel tank bands.

        39.2 N*m

        400 kgf*cm

        29 ft.*lbf

    3. Connect the parking brake cable assembly with the 2 bolts.

      6.0 N*m

      61 kgf*cm

      53 in.*lbf

  8. CONNECT FUEL TANK MAIN TUBE SUB-ASSEMBLY

    1. Type A:

      1. A296060C04

        *a

        Retainer

        *b

        Fuel Tube Connector

        *c

        Fuel Pipe

        *d

        O-ring

        V100135

        Push

        V100136

        Push In

        Push the fuel tube connector onto the fuel pipe and push in the retainer so that the claws engage.

        Note:
        • Check that there are no scratches or foreign matter around the connecting parts of the fuel tube connector and fuel pipe before performing this work.

        • After connecting the fuel tube connector, check that the fuel tube connector is securely connected by pulling on it.

    2. A289978C02

      *a

      Retainer

      *b

      Fuel Tube Connector Cover

      *c

      Fuel Tube Connector

      *d

      Fuel Pipe

      *e

      Nylon Tube

      *f

      O-ring

      Type B:

      1. Align the fuel tube connector with the pipe, push the fuel tube connector in until the retainer makes a "click" sound, then engage the lock of the fuel tube connector cover.

        Note:
        • Check that there are no scratches or foreign matter around the connecting parts of the fuel tube connector and fuel pipe before starting this step.

        • After connecting the fuel tube connector, check that the fuel tube connector is securely connected by pulling on it.

  9. CONNECT NO. 1 FUEL EVAPORATION TUBE SUB-ASSEMBLY

    1. A154751C11

      *a

      Fuel Pipe

      *b

      Rubber Hose

      *c

      Retainer

      *d

      O-ring

      Align the fuel tube connector with the fuel pipe, then push in the fuel tube connector until the retainer makes a "click" sound.

      Note:
      • Check that there are no scratches or foreign matter around the connecting parts of the fuel tube connector and fuel pipe before performing this work.

      • After connecting the fuel tube connector, check that the fuel tube connector is securely connected by pulling on it.

  10. CONNECT FUEL TANK TO FILLER PIPE HOSE

    1. A153002C01

      *a

      Upper

      *b

      180°

      (Clamp Bolt Area)

      Connect the fuel tank to filler pipe hose to the fuel tank assembly and tighten the clamp to secure it.

      Tip:

      Make sure the clamp bolt is within the area shown in the illustration.

  11. CONNECT FUEL TANK BREATHER TUBE

    1. A289979C02

      *1

      No. 1 Charcoal Canister Outlet Hose

      *2

      Fuel Tank Breather Tube

      *3

      Evaporation Vent Tube Clamp

      *a

      Upper

      *b

      20°

      *c

      180°

      (Clamp Bolt Area)

      Connect the fuel tank breather tube to the fuel tank filler pipe sub-assembly as shown in the illustration and tighten the clamp to secure it.

      Tip:

      Make sure the clamp bolt is within the area shown in the illustration.

  12. CONNECT NO. 1 CHARCOAL CANISTER OUTLET HOSE

    1. Connect the No. 1 charcoal canister outlet hose to the fuel tank filler pipe sub-assembly.

      Note:

      After connecting the fuel tank breather tube and No. 1 charcoal canister outlet hose, check that the evaporation vent tube clamp is securely connected to the fuel tank assembly.

  13. INSTALL NO. 1 FUEL TANK PROTECTOR

    1. for Sedan:

      1. Temporarily install the No. 1 fuel tank protector with the 3 bolts and nut.

      2. A161754N02

        Tighten the 3 bolts and nut in the order shown in the illustration.

        5.5 N*m

        56 kgf*cm

        49 in.*lbf

    2. except Sedan:

      1. Install the No. 1 fuel tank protector to the fuel tank assembly with the 4 bolts.

        5.5 N*m

        56 kgf*cm

        49 in.*lbf

  14. INSTALL REAR NO. 1 FLOOR UNDER COVER (w/ Cover)

    1. Install the rear No. 1 floor under cover with the 2 grommets.

    2. Install the 4 clips and nut.

  15. INSTALL CENTER EXHAUST PIPE ASSEMBLY

  16. INSTALL REAR FLOOR SIDE MEMBER BRACE SUB-ASSEMBLY (for Sedan)

  17. INSTALL REAR FLOOR SIDE MEMBER COVER RH

  18. INSTALL REAR FLOOR SIDE MEMBER COVER LH

  19. INSTALL FUEL SUCTION TUBE WITH PUMP AND GAUGE ASSEMBLY