GLOW PLUG CONTROLLER REMOVAL

PROCEDURE

  1. PRECAUTION

    Note:

    After turning the ignition switch off, waiting time may be required before disconnecting the cable from the negative (-) battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) battery terminal notice before proceeding with work.

    Click hereClick here

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note:

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click hereClick here

  3. REMOVE FRONT BUMPER ASSEMBLY

  4. REMOVE GLOW PLUG CONTROLLER

    1. A293846

      Disconnect the 4 glow plug controller connectors.

    2. A293847

      Remove the 2 bolts and glow plug controller.

  5. REMOVE NO. 1 GLOW PLUG CONTROLLER BRACKET

    1. A264965

      Remove the 2 screws and No. 1 glow plug controller bracket from the glow plug controller.