INNER REAR VIEW MIRROR INSTALLATION

PROCEDURE

  1. INSTALL INNER REAR VIEW MIRROR ASSEMBLY (w/o EC Mirror)

    1. B330973C01

      *a

      Lock Lever

      Slide the inner rear view mirror assembly in the direction indicated by the arrow in the illustration to install it.

      Note:

      Confirm that the lock lever is securely installed.

  2. INSTALL INNER REAR VIEW MIRROR ASSEMBLY (w/ EC Mirror)

    1. w/o Automatic High Beam System:

      1. Using a T20 "TORX" socket wrench, install the inner rear view mirror assembly with the screw.

        1.75 N*m

        18 kgf*cm

        15 in.*lbf

      2. Connect the connector.

    2. w/ Automatic High Beam System:

      Note:
      • Do not touch the camera lens (built into the inner rear view mirror assembly) with a bare hand.

      • Do not allow anything to adhere to the camera lens (built into the inner rear view mirror assembly).

      • Do not apply strong impacts to the inner rear view mirror assembly.

      • Do not allow any liquid to get on the inner rear view mirror assembly.

      1. Using a T20 "TORX" socket wrench, install the inner rear view mirror assembly with the screw.

        1.75 N*m

        18 kgf*cm

        15 in.*lbf

      2. Connect the connector.

  3. INSTALL INNER REAR VIEW MIRROR STAY HOLDER COVER (w/ EC Mirror)

    1. Engage the 2 claws.

    2. B330976

      Slide the inner rear view mirror stay holder cover and engage the 2 guides to install the cover as shown in the illustration.