CAMSHAFT POSITION SENSOR INSPECTION

CAUTION / NOTICE / HINT

PROCEDURE

  1. INSPECT NO. 1 CRANK POSITION SENSOR (w/o Stop And Start System)

    1. A199029C03

      *a

      Component without harness connected

      (No. 1 Crank Position Sensor)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance

      Tester Connection

      Condition

      Specified Condition

      1 - 2

      Cold

      835 to 1400 Ω

      Hot

      1060 to 1645 Ω

      Tip:

      "Cold" and "Hot" mean the temperature of the coils themselves. "Cold" is from -10 to 50°C (14 to 122°F) and "Hot" is from 50 to 100°C (122 to 212°F).

      If the resistance is not as specified, replace the No. 1 crank position sensor.