FRONT WIPER MOTOR ON-VEHICLE INSPECTION

PROCEDURE

  1. INSPECT WINDSHIELD WIPER MOTOR ASSEMBLY

    1. for LH Side:

      1. E264942C02

        *a

        Dot

        Operate the windshield wiper motor assembly.

      2. Stop the windshield wiper motor assembly operation.

      3. Check the automatic stop (park) position.

        Tip:

        After the front wiper motor is stopped, check the automatic stop position after lifting the wiper blade 2 times.

        Standard Clearance

        Area

        Measurement

        A

        10.0 mm (0.394 in.)

        OK

        The front wiper stops at the position shown in the illustration.

    2. for RH Side:

      1. E264943C02

        *a

        Dot

        Operate the windshield wiper motor assembly.

      2. Stop the windshield wiper motor assembly operation.

      3. Check the automatic stop (park) position.

        Tip:

        After the front wiper motor is stopped, check the automatic stop position after lifting the wiper blade 2 times.

        Standard Clearance

        Area

        Measurement

        A

        10.0 mm (0.394 in.)

        OK

        The front wiper stops at the position shown in the illustration.