BLACK OUT TAPE(for Rear Door) INSTALLATION

CAUTION / NOTICE / HINT

Tip:
  • Use the same procedure for the RH and LH sides.

  • The procedure described below is for the LH side.

PROCEDURE

  1. REPAIR INSTRUCTION

  2. INSTALL NO. 2 BLACK OUT TAPE

    1. B329312C02

      *A

      for LH Side

      *B

      for RH Side

      *a

      Straight line

      *b

      Triangle

      *c

      Perforation

      *d

      Remove

      Remove the portion of the No. 2 black out tape at the perforation as shown in the illustration.

    2. Refer to the illustration to position a new No. 2 black out tape.

      B329313C04
      Table 1. Standard Measurement

      Dimension

      Measurement

      A

      2.0 to 4.0 mm (0.0787 to 0.157 in.)

      B

      5.0 mm (0.197 in.)

      C

      5.0 mm (0.197 in.)

      D

      2.0 to 4.0 mm (0.0787 to 0.157 in.)

    3. Remove the release paper and apply the No. 2 black out tape.

  3. INSTALL REAR DOOR FRONT WINDOW FRAME MOULDING