ENGINE UNIT REMOVAL

PROCEDURE

  1. REMOVE INTAKE MANIFOLD

    1. A308849

      Remove the 2 bolts and disconnect the air tube from the cylinder head cover sub-assembly.

    2. A225707

      Slide the 2 clamps and disconnect the 2 water by-pass hoses.

    3. A310724

      Disconnect the 2 clamps.

    4. Slide the clamp and disconnect the ventilation hose from the intake manifold.

    5. Remove the 4 bolts, 2 nuts and intake manifold and intake manifold stay.

    6. Remove the No. 1 intake manifold to head gasket from the intake manifold.

  2. DISCONNECT FUEL TUBE SUB-ASSEMBLY

  3. REMOVE FUEL DELIVERY PIPE SUB-ASSEMBLY

  4. REMOVE NO. 1 DELIVERY PIPE SPACER

  5. REMOVE FUEL INJECTOR ASSEMBLY

  6. REMOVE IGNITION COIL ASSEMBLY

    1. A162718C01

      *1

      Engine Head Cover

      *2

      Spark Plug Tube

      *3

      Plug Cap

      Remove the 4 bolts and 4 ignition coil assemblies.

      Note:

      When removing each ignition coil assembly, do not damage the plug cap on the engine head cover opening or the upper edge of the spark plug tube.

  7. REMOVE ENGINE OIL LEVEL DIPSTICK GUIDE

    1. A234913

      Remove the engine oil level dipstick.

    2. Remove the bolt and engine oil level dipstick guide.

    3. Remove the O-ring from the engine oil level dipstick guide.

  8. REMOVE NO. 1 EXHAUST MANIFOLD HEAT INSULATOR

  9. REMOVE MANIFOLD STAY

  10. REMOVE EXHAUST MANIFOLD

  11. REMOVE VENTILATION HOSE

    1. A147585

      Slide the clip and remove the ventilation hose from the ventilation valve.

  12. DISCONNECT NO. 3 WATER BY-PASS HOSE

    1. A173362

      Slide the clip and disconnect the No. 3 water by-pass hose from the water inlet housing.

  13. REMOVE NO. 1 WATER BY-PASS PIPE

    1. A308172C01

      *A

      for CVT

      *B

      for Manual Transaxle

      Remove the 2 bolts and No. 1 water by-pass pipe.

  14. DISCONNECT WATER BY-PASS HOSE

    1. A196588

      Slide the clip and disconnect the water by-pass hose from the cylinder head sub-assembly.

  15. DISCONNECT WATER INLET HOSE

    1. A173361

      Slide the 2 clamps and disconnect the water inlet hose.

  16. REMOVE WATER INLET

  17. REMOVE THERMOSTAT