BACK-UP LIGHT SWITCH REMOVAL

PROCEDURE

  1. REMOVE NO. 1 ENGINE COVER (w/ No. 1 Engine Cover)

  2. REMOVE AIR CLEANER CAP SUB-ASSEMBLY (w/ Glow Plug Controller)

  3. REMOVE AIR CLEANER CAP SUB-ASSEMBLY (w/o Glow Plug Controller)

  4. REMOVE AIR CLEANER CASE SUB-ASSEMBLY (w/ Glow Plug Controller)

  5. REMOVE AIR CLEANER CASE SUB-ASSEMBLY (w/o Glow Plug Controller)

  6. REMOVE BACK-UP LIGHT SWITCH ASSEMBLY

    1. C202924

      Disconnect the back-up light switch assembly connector.

    2. C202925N01

      Using SST, remove the back-up light switch assembly and gasket from the manual transaxle assembly.

      09817-16011