AIRBAG CUT-OFF SWITCH INSPECTION
PROCEDURE
INSPECT AIRBAG CUT OFF SWITCH CYLINDER SUB-ASSEMBLY
-
*a
Component without harness connected
(Airbag Cut Off Switch Cylinder Sub-assembly)
Measure the resistance according to the value(s) in the table below.
Standard Resistance
Tester Connection
Switch Condition
Specified Condition
E86-2 (PMC+) - E86-1 (PMC-)
Cut off switch in ON
360 to 440 Ω
E86-2 (PMC+) - E86-1 (PMC-)
Cut off switch in OFF
90 to 110 Ω
If the result is not as specified, replace the airbag cut off switch cylinder sub-assembly.
-