FUEL PUMP(for High Pressure) ON-VEHICLE INSPECTION
PROCEDURE
FUEL PUMP ASSEMBLY OPERATION
Check fuel pressure.
Connect the GTS to the DLC3.
Start the engine.
Turn the GTS on.
Enter the following menus: Powertrain / Engine / Active Test / Control the Target Fuel Pressure Offset / High Fuel Pressure Sensor.
Powertrain > Engine > Active Test
Active Test Display
Control the Target Fuel Pressure Offset
Data List Display
High Fuel Pressure Sensor
Check that the fuel pressure fluctuates when the target fuel pressure changes.
Tip:The target fuel pressure operation decreases the target fuel pressure by 12.5% or increases the target fuel pressure by 24.8%.
If the result is not as specified, replace the fuel pump assembly or fuel delivery pipe (fuel pressure sensor).
Check operating sound.
Start the engine.
Using a sound scope, check the operating sound of the fuel pump assembly.
If no sound can be heard, check the fuel pump assembly, wire harness and ECM.
Stop the engine.