FUEL PUMP(for High Pressure) ON-VEHICLE INSPECTION
PROCEDURE
FUEL PUMP ASSEMBLY OPERATION
Check fuel pressure.
Connect the GTS to the DLC3.
Start the engine.
Turn the GTS on.
Enter the following menus: Powertrain / Engine / Active Test / Control the Target Fuel Pressure Offset / Fuel Pressure (High).
Powertrain > Engine > Active Test
Active Test Display
Control the Target Fuel Pressure Offset
Data List Display
Fuel Pressure (High)
Check that the fuel pressure fluctuates when the target fuel pressure changes.
Tip:The target fuel pressure operation decreases the target fuel pressure by 12.5% or increases the target fuel pressure by 24.8%.
If the result is not as specified, replace the fuel pump assembly or fuel delivery pipe (fuel pressure sensor).
Check operating sound.
Start the engine.
Using a sound scope, check the operating sound of the fuel pump assembly.
If no sound can be heard, check the fuel pump assembly, wire harness and ECM.
Stop the engine.