LUMBAR SWITCH INSPECTION

PROCEDURE

  1. INSPECT FRONT LUMBAR POWER SEAT SWITCH

    1. B313251C01

      *A

      for LHD

      *B

      for RHD

      *1

      Hold Switch

      *2

      Release Switch

      *a

      Component without harness connected

      (Front Lumbar Power Seat Switch)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance

      Tester Connection

      Condition

      Specified Condition

      3 - 4

      Hold switch pressed

      Below 1 Ω

      3 - 1

      Release switch pressed

      Below 1 Ω

      If the result is not as specified, replace the front lumbar power seat switch.