REAR COMBINATION LIGHT ASSEMBLY(for Sedan) DISASSEMBLY

PROCEDURE

  1. REMOVE TAIL AND STOP LIGHT BULB

    1. E274819

      Turn the tail and stop light socket with the tail and stop light bulb as shown in the illustration to remove them as a unit.

    2. Remove the tail and stop light bulb from the tail and stop light socket.

  2. REMOVE REAR TURN SIGNAL LIGHT BULB

    1. E274821

      Turn the rear turn signal light socket with the rear turn signal light bulb as shown in the illustration to remove them as a unit.

    2. Remove the rear turn signal light bulb from the rear turn signal light socket.

  3. REMOVE REAR COMBINATION LIGHT LENS GASKET

    1. E274823

      Remove the rear combination light lens gasket.

      Note:
      • Be sure to remove all traces of the old rear combination light lens gasket from the vehicle body.

      • Do not reuse the removed rear combination light lens gasket. Be sure to install a new rear combination light lens gasket to prevent water ingress.