FRONT SEAT SIDE AIRBAG ASSEMBLY(for Hatchback, Wagon) REMOVAL

CAUTION / NOTICE / HINT

CAUTION:
  • Be sure to read Precaution thoroughly before servicing.

    Click hereClick here

  • Wear protective gloves. Sharp areas on the seat frame and adjuster may injure your hands.

  • If the front seat airbag assembly was deployed, replace the front seat airbag assembly, front seatback frame sub-assembly, separate type front seatback cover and separate type front seatback pad with the necessary parts in accordance with the extent of the collision damage.

    Click here

Tip:
  • Use the same procedure for the RH side and LH side.

  • The procedure listed below is for the LH side.

PROCEDURE

  1. REMOVE FRONT SEAT ASSEMBLY

  2. DISCONNECT SEPARATE TYPE FRONT SEAT CUSHION COVER

  3. DISCONNECT SEPARATE TYPE FRONT SEATBACK COVER

  4. SEPARATE FRONT SEAT AIRBAG ASSEMBLY

  5. REMOVE RECLINING ADJUSTER RELEASE HANDLE

  6. REMOVE VERTICAL ADJUSTING HANDLE (w/ Vertical Adjuster)

  7. REMOVE FRONT SEAT CUSHION SHIELD

  8. REMOVE FRONT SEAT INNER CUSHION SHIELD

  9. REMOVE SEPARATE TYPE FRONT SEATBACK COVER WITH PAD

  10. REMOVE FRONT SEAT AIRBAG ASSEMBLY

    CAUTION:

    When storing the front seat airbag assembly, keep the airbag deployment side facing upward.

    1. B324584

      Disengage the 2 clamps.

    2. Remove the 2 nuts and front seat airbag assembly.

      CAUTION:
      • The nuts must not be reused.

      • Make sure that the front seatback frame sub-assembly is not deformed. If it is, replace it with a new one.