DRIVE BELT REMOVAL

PROCEDURE

  1. REMOVE FRONT WHEEL RH

  2. REMOVE NO. 1 ENGINE UNDER COVER

  3. REMOVE REAR ENGINE UNDER COVER RH

  4. REMOVE FRONT SUSPENSION MEMBER REINFORCEMENT RH

    1. A292252

      Remove the 4 bolts and front suspension member reinforcement RH.

  5. REMOVE V-RIBBED BELT

    1. Using SST and a 22 mm wrench, rotate the V-ribbed belt tensioner assembly counterclockwise to loosen the belt tension. Then remove the V-ribbed belt.

      09216-42010

      A291609C01

      *A

      w/o Air Conditioning System

      *B

      w/ Air Conditioning System

      *1

      22 mm wrench

      -

      -

      CAUTION:
      • Be careful as the wrench only fits loosely on the belt tensioner tool set point. The wrench may come off the set point and cause injuries.

      • Be careful that your hands do not become jammed between parts such as the V-ribbed belt, pulleys, etc.

      Note:

      Make sure SST is installed as shown in the illustration. If not, SST and/or the V-ribbed belt may not be able to be removed.