BRAKE FLUID ON-VEHICLE INSPECTION
PROCEDURE
INSPECT BRAKE FLUID LEVEL IN RESERVOIR
Check the fluid level.
*A
for Type A Brake Master Cylinder Sub-assembly
*B
for Type B Brake Master Cylinder Sub-assembly
If the brake fluid level is lower than the MIN line, check for leaks and brake pad wear. If necessary, refill the reservoir with brake fluid to the MAX line after repair or replacement.
Brake Fluid
Model
Brake Fluid
for LHD
for Type A Brake Master Cylinder Sub-assembly
SAE J1704 or FMVSS No. 116 DOT 4
for Type B Brake Master Cylinder Sub-assembly
SAE J1703 or FMVSS No. 116 DOT 3
for RHD
-
SAE J1704 or FMVSS No. 116 DOT 4
Note:If using a dropper to adjust the fluid amount, make sure that the dropper has not been used with mineral oils, water or deteriorated brake fluid. Sealed areas may deteriorate and lead to fluid leaks, or the fluid may deteriorate and lead to decreased efficiency.