FUEL PUMP REASSEMBLY
PROCEDURE
INSTALL FUEL PUMP
Tip:Perform "Inspection After Repair" after replacing the fuel pump with filter assembly.
-
*1
O-ring
*2
Fuel Pump Spacer
Apply gasoline to a new O-ring. Then install the O-ring and fuel pump spacer to the fuel pump.
Connect the fuel pump harness connector to the fuel pump.
Engage the 5 claws of the fuel pump.
Note:Do not remove the suction filter.
Do not use either the fuel pump or the suction filter if the suction filter is removed from the fuel pump.
Engage the 2 claws of the No. 1 fuel suction support.
Engage the 2 claws of the fuel suction support and install the fuel filter and the fuel pump onto the fuel sub-tank.
-
Align the groove of the fuel pump filter hose with the cutout of the fuel sub-tank and install the hose.
Note:Do not apply excessive force to the fuel tube or the suction support.
Connect the connector of the fuel pump harness to the fuel suction plate sub-assembly.
-
INSTALL FUEL SENDER GAUGE ASSEMBLY