HEATER FUEL PUMP INSTALLATION

PROCEDURE

  1. INSTALL HEATER PUMP ASSEMBLY

    1. Install the heater pump assembly with the nut.

      E266036C01

      *a

      Marking (Blue)

      *b

      Marking (Orange)

      9.8 N*m

      100 kgf*cm

      87 in.*lbf

    2. Align the markings on each hose and pipe as shown in the illustration and connect them with the clips.

    3. Connect the connector.

  2. INSTALL OUTER COWL TOP PANEL

  3. INSTALL DIFFERENTIAL PRESSURE SENSOR ASSEMBLY (for 1AD-FTV)

  4. INSTALL NO. 2 HEATER AIR DUCT SPLASH SHIELD SEAL

  5. INSTALL WATER GUARD PLATE LH

  6. INSTALL WINDSHIELD WIPER MOTOR AND LINK ASSEMBLY