EXHAUST PIPE REMOVAL
PROCEDURE
REMOVE TAIL EXHAUST PIPE ASSEMBLY
-
*A
for Hatchback
*B
for Wagon
Remove the 2 bolts and 2 compression springs.
Disconnect the tail exhaust pipe assembly from the 3 exhaust pipe supports.
Note:Wrap the tail exhaust pipe baffle sub-assembly with a piece of cloth to keep it from damaging the rear bumper.
Remove the gasket from the front exhaust pipe assembly.
-
REMOVE FRONT NO. 3 ENGINE UNDER COVER
-
Disengage the 4 clips to remove front No. 3 engine under cover.
-
REMOVE FRONT CENTER FLOOR BRACE SUB-ASSEMBLY
-
*A
Type A
*B
Type B
Remove the 4 bolts and front center floor brace sub-assembly.
-
REMOVE AIR FUEL RATIO SENSOR
REMOVE FRONT EXHAUST PIPE ASSEMBLY
-
Remove the 2 bolts and 2 compression springs.
Disconnect the front exhaust pipe assembly from the 2 exhaust pipe supports.
Remove the gasket from the exhaust manifold converter sub-assembly.
-
REMOVE TAIL EXHAUST PIPE BAFFLE SUB-ASSEMBLY (w/ Tail Exhaust Pipe Baffle)
Tip:Perform this procedure only when replacement of the tail exhaust pipe baffle sub-assembly is necessary.
If the tail exhaust pipe baffle sub-assembly is removed, replace it with a new one.
-
*a
Plastic Hammer
Using a plastic hammer, remove the tail exhaust pipe baffle sub-assembly from the tail exhaust pipe assembly.