PRE-CRASH SAFETY SYSTEM PROBLEM SYMPTOMS TABLE

Note:
  • When replacing the combination meter assembly, make sure to replace it with a new one.

  • When replacing the pre-crash safety city sensor, replace it with a new one and be sure to perform initialization. If a pre-crash safety city sensor which was installed to another vehicle is used, the information stored in the pre-crash safety city sensor will not match the information from the vehicle and, as a result, a DTC may be stored.

Tip:

Use the table below to help determine the cause of problem symptoms. If multiple suspected areas are listed, the potential causes of the symptoms are listed in order of probability in the "Suspected Area" column of the table. Check each symptom by checking the suspected areas in the order they are listed. Replace parts as necessary.

Table 1. Pre-crash Safety System

Symptom

Suspected Area

Link

"Check Pre-Crash Safety." is displayed and PCS OFF warning light is blinking

Pre-crash safety city sensor

Click hereClick here

Combination meter assembly

Click hereClick here

"Front sensor systems are temporarily unavailable due to inappropriate temp. Wait a moment." is displayed and PCS OFF warning light is blinking or illuminated

The pre-crash safety city sensor temperature is extremely high and the system will not operate. When the temperature returns to normal, normal control will return (Check History of High or Low Temperature).

Click hereClick here

Heater Relay Circuit*2

Click hereClick here

Pre-crash safety city sensor

Click hereClick here

Combination meter assembly

Click hereClick here

"Front sensor systems are temporarily unavailable due to blocked vision. Clean windshield." is displayed and PCS OFF warning light is blinking or illuminated

The pre-crash safety city sensor cannot detect obstacles due to dirt. When dirt is removed, normal control will return (Check History of Blockage).

Click hereClick here

Heater Relay Circuit*2

Click hereClick here

Pre-crash safety city sensor

Click hereClick here

Combination meter assembly

Click hereClick here

"Pre-Crash Safety temporarily not available." is displayed and PCS OFF warning light is blinking or illuminated

The pre-crash safety system does not operate due to abnormal pre-crash safety city sensor voltage

Click hereClick here

Pre-crash safety city sensor

Click hereClick here

Combination meter assembly

Click hereClick here

Although there is possibility of collision, pre-crash controls (all front collision controls) do not operate (when PCS OFF warning light does not illuminate)

Vehicle condition/environment does not match pre-crash control operation conditions (confirm control operation conditions)

Click hereClick here

Laser Sensor Inspection

Click hereClick here

Pre-crash safety system circuit

Click hereClick here

Check pre-crash safety city sensor installation condition

Click hereClick here

Adjust pre-crash safety city sensor optical axis

Click hereClick here

Pre-crash safety city sensor

Click hereClick here

Reverse switch signal*1

Click hereClick here

Combination meter assembly

Click hereClick here

Although there is no possibility of collision, pre-crash control (all front collision controls) operate

Driving condition/environment matches pre-crash control operation conditions (Check Precaution for Pre-crash Safety City Sensor)

Click hereClick here

Laser Sensor Inspection

Click hereClick here

Check pre-crash safety city sensor installation condition

Click hereClick here

Adjust pre-crash safety city sensor optical axis

Click hereClick here

Pre-crash safety city sensor

Click hereClick here

Pre-crash safety system cannot be canceled (PCS OFF warning light does not illuminate)

Check pre-crash system cancel switch assembly condition

-

Pre-crash safety system switch circuit

Click here

Pre-crash safety city sensor

Click hereClick here

Combination meter assembly

Click hereClick here

Pre-crash brake control and pre-crash brake assist control cannot be canceled (PCS OFF warning light does not illuminate)

Check VSC OFF switch condition

-

Vehicle stability control system

Click here

Pre-crash safety city sensor

Click hereClick here

Combination meter assembly

Click hereClick here

Pre-crash safety system warning timing cannot be changed (warning timing setting screen not displayed on multi-information display)

Check pre-crash system cancel switch assembly condition

-

Pre-crash safety system switch circuit

Click here

Pre-crash safety city sensor

Click hereClick here

Combination meter assembly

Click hereClick here

*1: for Manual Transaxle without Pre-crash Safety City Heater

*2: w/ Pre-crash Safety City Heater