CRUISE CONTROL SYSTEM(for 8NR-FTS) Cruise Main Indicator Light Circuit

DTC Code DTC Name
Cruise Main Indicator Light Circuit

DESCRIPTION

  • The ECM turns on the cruise control indicator by sending indicator output demand signals to the combination meter assembly via CAN communication.

  • The cruise control indicator illuminates (green) when the cruise control system is turned on using the cruise control main switch (ON-OFF button). If a malfunction is detected, the cruise control indicator goes out and a warning message is displayed.

  • The cruise control indicator circuit uses CAN communication. If the cruise control indicator is not functioning correctly, check for CAN communication DTCs before troubleshooting this circuit.

CAUTION / NOTICE / HINT

Note:

Before replacing the ECM, refer to Service Bulletin.

PROCEDURE

  1. PERFORM ACTIVE TEST USING GTS (METER DISPLAY 1)

    1. Connect the GTS to the DLC3.

    2. Turn the ignition switch to ON.

    3. Turn the GTS on.

    4. Enter the following menus: Body Electrical / Combination Meter / Active Test.

    5. Perform the Active Test according to the display on the GTS.

      Body Electrical > Combination Meter > Active Test

      Tester Display

      Measurement Item

      Control Range

      Diagnostic Note

      Meter Display 1

      Multi-information display

      OFF or All

      for Multi-information Display (Color Type)

      Body Electrical > Combination Meter > Active Test

      Tester Display

      Meter Display 1

    Result

    Result

    Proceed to

    The multi-information display in the combination meter assembly turns on or off according to the operation of the Active Test.

    A

    The multi-information display in the combination meter assembly does not turn on or off according to the operation of the Active Test.

    B

    B

    GO TO METER / GAUGE SYSTEM

    A
  2. READ VALUE USING GTS (CRUISE INDICATOR)

    1. Enter the following menus: Powertrain / Cruise Control / Data List.

    2. Read the Data List according to the display on the GTS.

      Powertrain > Cruise Control > Data List

      Tester Display

      Measurement Item

      Range

      Normal Condition

      Diagnostic Note

      Cruise Indicator

      Cruise control indicator signal

      ON or OFF

      ON: Cruise control indicator turns on

      OFF: Cruise control indicator turns off

      -

      Powertrain > Cruise Control > Data List

      Tester Display

      Cruise Indicator

    Result

    Result

    Proceed to

    The cruise control indicator illuminates and turns off according to the operation of the cruise control main switch (ON-OFF switch).

    A

    The cruise control indicator does not illuminate but the Data List item Cruise Indicator changes according to the operation of the cruise control main switch (ON-OFF switch).

    B

    The cruise control indicator does not illuminate and the Data List item Cruise Indicator does not change according to the operation of the cruise control main switch (ON-OFF switch).

    C

    A

    PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE

    B

    REPLACE COMBINATION METER ASSEMBLY

    C

    REPLACE ECM