FUEL LID OPENER UNIT REMOVAL

PROCEDURE


  1. PRECAUTION

    Click here

  2. REMOVE FUEL LID LOCK WITH MOTOR ASSEMBLY

    Click here

  3. REMOVE REAR WHEEL LH

    Click here

  4. REMOVE FRONT REAR WHEEL HOUSE PLATE

    Click here

  5. REMOVE REAR WHEEL HOUSE LINER LH


    1. B008GF6

      Remove the screw.

    2. B008GH0

      Remove the clip.

    3. B008GHA

      Remove the clip.

    4. B008GFN

      Remove the clip.

    5. B008GF2

      Remove the 3 grommets.

      Tech Tips

      The grommets need to be replaced with new ones because they will break when they are removed.

    6. B008GG7

      Remove the 8 nuts and rear wheel house liner LH.

  6. REMOVE FUEL FILLER OPENING LID ASSEMBLY


    1. B008GGSC01
      B008GB8 Protective Tape

      Apply protective tape around the fuel filler opening lid sub-assembly as shown in the illustration.

    2. B008GCLC01
      B008GB8 Protective Tape

      Using a screwdriver with its tip wrapped with protective tape, disengage the claw.

    3. Slide the fuel filler opening lid assembly to disconnect it from the 4 parts (a) and remove it as shown in the illustration.

  7. REMOVE FUEL TANK CAP ASSEMBLY


    1. B008GGL

      Remove the fuel tank cap assembly as shown in the illustration.

    2. B008GE1

      Disengage the clamp to remove the fuel tank cap assembly.

  8. REMOVE FUEL FILLER OPENING LID SUB-ASSEMBLY


    1. Remove the fuel inlet box ring as shown in the illustration.

      B008GHUC01
      *1 Fuel Inlet Box Ring - -
    2. Remove the fuel tank filler pipe shield as shown in the illustration.

      B008GHBN01
    3. B008GC2

      Remove the 4 screws.

    4. B008GFG

      Remove the fuel filler opening lid sub-assembly as shown in the illustration.

    5. Push the fuel tank filler pipe shield and fuel inlet box ring as shown in the illustration.

      B008GHYC01
      *1 Fuel Inlet Box Ring - -
      *a Push *b Pull
    6. Pull the fuel tank filler pipe shield and fuel inlet box ring as shown in the illustration to remove them as a set.

    7. B008GD7C01
      *1 Fuel Inlet Box Ring

      Remove the fuel inlet box ring.