SHIFT AND SELECT LEVER SHAFT DISASSEMBLY
PROCEDURE
REMOVE SELECTING BELL CRANK ASSEMBLY
-
Remove the 2 bolts and selecting bell crank assembly from the manual transmission case.
-
REMOVE CONTROL SHIFT LEVER BUSHING
-
Remove the control shift lever bushing from the selecting bell crank assembly.
-
REMOVE NO. 1 SELECTING BELL CRANK DUST COVER
-
Remove the No. 1 selecting bell crank dust cover from the selecting bell crank assembly.
-
REMOVE BACK-UP LIGHT SWITCH ASSEMBLY
-
Using SST, remove the back-up light switch assembly and gasket from the manual transmission case.
09816-30010
-
REMOVE NEUTRAL POSITION SWITCH
-
Using SST, remove the neutral position switch and gasket from the manual transmission case.
09816-30010
-
REMOVE NO. 1 LOCK BALL ASSEMBLY
-
Remove the No. 1 lock ball assembly from the manual transmission case.
-
REMOVE NO. 2 LOCK BALL ASSEMBLY
-
Remove the No. 2 lock ball assembly from the manual transmission case.
-
REMOVE SHIFT GATE PIN
-
Remove the shift gate pin from the manual transmission case.
-
REMOVE SHIFT AND SELECT LEVER ASSEMBLY
-
Remove the 4 bolts and shift and select lever assembly from the manual transmission case.
-
REMOVE NO. 1 SHIFT LEVER INNER
-
Using a pin punch and hammer, remove the slotted spring pin from the No. 1 shift lever inner.
-
Remove the No. 1 shift lever inner and shift interlock plate from the shift and select lever shaft.
-
REMOVE SHIFT AND SELECT LEVER SHAFT
-
Remove the control shaft cover and the shift and select lever boot from the shift and select lever shaft.
-
REMOVE SHIFT GATE PLATE
-
Remove the 2 bolts and shift gate plate from the No. 1 shift lever inner.
-
REMOVE PIN
-
Remove the 2 pins from the No. 1 shift lever inner.
-
REMOVE SHIFT LEVER DAMPER
-
Remove the 2 bolts and shift lever damper from the shift lever shaft.
-
REMOVE CONTROL SHAFT COVER OIL SEAL
-
Using a screwdriver, remove the control shaft cover oil seal from the control shaft cover.
-