VEHICLE STABILITY CONTROL SYSTEM
| DTC Code | DTC Name |
|---|---|
| HOW TO PROCEED WITH TROUBLESHOOTING |
CAUTION / NOTICE / HINT
*: Use the GTS.
PROCEDURE
VEHICLE BROUGHT TO WORKSHOP
Result
Proceed to
NEXT
CUSTOMER PROBLEM ANALYSIS
Interview the customer and confirm the problem.
Click hereClick hereClick hereClick hereClick hereClick hereClick here
Result
Proceed to
NEXT
CHECK DTC AND FREEZE FRAME DATA*
Check and record DTCs and Freeze Frame Data.
for DTC Check / Clear:Click hereClick here
for Freeze Frame Data:Click hereClick hereClick here
Chassis > ABS/VSC/TRC > Trouble Codes
Clear the DTCs and Freeze Frame Data.
for DTC Check / Clear:Click hereClick here
for Freeze Frame Data:Click hereClick hereClick here
Chassis > ABS/VSC/TRC > Clear DTCs
Reconfirm the DTCs.
Reconfirm the DTCs based on the recorded DTCs and Freeze Frame Data.
for DTC Check / Clear:Click hereClick here
for Freeze Frame Data:Click hereClick hereClick here
Chassis > ABS/VSC/TRC > Trouble Codes
Tip:When CAN communication system DTCs are output, repair the CAN communication system first.
If DTC U0100, U0123 and/or U0126 are among the CAN communication DTCs that are output, first use the Data List to check for a momentary open circuit.
If the GTS cannot communicate with the skid control ECU (brake actuator assembly), inspect the CAN communication system.
If there is no response from the skid control ECU (brake actuator assembly), inspect the +BS circuit of the skid control ECU (brake actuator assembly).
Result
Result
Proceed to
DTCs are not output. (Problem symptom does not occur.)
A
DTCs are not output. (Problem symptom occur.)
B
DTCs are output.
C
SYMPTOM SIMULATION
Proceed to How to Proceed with Troubleshooting.
Result
Proceed to
NEXT
PROBLEM SYMPTOMS TABLE
Proceed to Problem Symptoms Table.
Result
Proceed to
NEXT
NEXT CIRCUIT INSPECTION*Click here
DIAGNOSTIC TROUBLE CODE CHART
Proceed to Diagnostic Trouble Code Chart.
Click hereClick hereClick hereClick hereClick hereClick here
Result
Proceed to
NEXT
CIRCUIT INSPECTION*
Result
Proceed to
NEXT
IDENTIFICATION OF PROBLEM
Result
Proceed to
NEXT
REPAIR OR REPLACEMENT
Result
Proceed to
NEXT
CONFIRMATION TEST*
Result
Proceed to
NEXT
NEXT END