FRONT DRIVE SHAFT ASSEMBLY(for 1ZR-FE, 2ZR-FE) INSPECTION

PROCEDURE

  1. INSPECT FRONT DRIVE SHAFT ASSEMBLY

    1. C211744

      Check that there is no excessive play in the radial direction of the outboard joint.

    2. Check that the inboard joint slides smoothly in the thrust direction.

    3. Check that there is no excessive play in the radial direction of the inboard joint.

    4. Check the boots for damage.

    5. C157783N23

      Check whether each drive shaft dimension (A) is within specification.

      Note:

      Keep the drive shaft assembly level during inspection.

      Dimension (A)

      Dimension (A)

      LH Side (w/ Metal Type Under Cover)

      589.5 mm (1.93 ft.)

      LH Side (w/o Metal Type Under Cover)

      589.25 mm (1.93 ft.)

      RH Side

      875.25 mm (2.87 ft.)