BRAKE LINE PRECAUTION

  1. TROUBLESHOOTING PRECAUTION

Note:
  • Since the brake lines are critical safety related parts, be sure to disassemble and inspect the components if a brake fluid leak is found. If any abnormalities are found, replace the component with a new one.

  • When removing brake components, cover the brake line connections to prevent foreign matter such as dust or dirt from entering the lines.

  • Do not damage or deform the brake lines during the removal and installation procedures.

  • When installing a grommet to the vehicle body, ensure that the brake line passes through the center of the grommet.

  • When installing a brake line or flexible hose, ensure that they are free from twists or kinks.

  • If the metal end of a flexible hose does not match the groove on the bracket, twist the hose slightly to insert it.

  • Flexible hoses must be free from shock absorber oil, grease, etc.

  • When installing a brake line to a plastic clamp, ensure that the brake line is not loose or pinched.

  • Do not reuse any clips or plastic clamps removed from a flexible hose.

  • After installing a brake line or flexible hose, ensure that they do not interfere with any other components or vehicle body.

  • Do not allow brake fluid on any painted vehicle body surface. If brake fluid leaks onto any painted surface, immediately wash it off.

  • C102779C08

    *a

    Disconnecting

    *b

    Connecting

    *c

    Hold

    *d

    Turn

    When disconnecting and connecting a flexible hose and brake line:

    1. Hold the flexible hose with a wrench and disconnect the brake line using a union nut wrench without deforming the line.

    2. Remove the clip and disconnect the flexible hose.

    3. Secure the flexible hose with a new clip. At this time, be sure to securely install the clip.

    4. Connect the brake line using a union nut wrench without deforming the line.

  • C156026C03

    *a

    Hold

    *b

    Turn

    *c

    Way

    When connecting a brake line and way:

    1. Support the way to prevent deformation of the brake line and connect the brake line to the way with a union nut wrench.

    2. Support the way to prevent deformation of the brake line and install the bolt to secure the way to the vehicle body.