INTAKE MANIFOLD REMOVAL

PROCEDURE

  1. REMOVE THROTTLE BODY ASSEMBLY

  2. REMOVE INTAKE MANIFOLD

    1. A240607

      Disengage the 4 wire harness clamps.

    2. Remove the bolt and wire harness clamp bracket.

    3. A235774

      Remove the engine cover joint and disconnect the wire harness clamp bracket.

    4. Disengage the wire harness clamp.

    5. Disconnect the No. 2 air hose and connector.

    6. A296108

      Disconnect the No. 1 fuel vapor feed hose and No. 3 air hose from the intake manifold.

    7. Slide the 2 clips and disconnect the ventilation hose and No. 1 vacuum transmitting hose from the intake manifold.

    8. A205676

      Remove the 5 bolts, 2 nuts, intake manifold and intake manifold stay.

    9. A308412

      Remove the No. 1 intake manifold to head gasket from the intake manifold.

    10. A216085

      Remove the engine cover joint from the intake manifold.

  3. REMOVE STUD BOLT (w/ Stud Bolt)

    Tip:

    If a stud bolt is deformed or the threads are damaged, replace it.

    1. A235776

      Using an E6 "TORX" socket wrench, remove the 2 stud bolts from the intake manifold.