IGNITION COIL AND SPARK PLUG INSTALLATION
PROCEDURE
INSTALL SPARK PLUG
Using a 14 mm spark plug wrench, install the 4 spark plugs to the cylinder head sub-assembly
20 N*m
204 kgf*cm
15 ft.*lbf
Note:If a component has been dropped or subjected to a strong impact, replace it.
Install the same parts in the same combination to the original locations.
Tip:Perform "Inspection After Repairs" after replacing the spark plug (Click here).
INSTALL NO. 1 IGNITION COIL
-
*a
Ignition Coil Assembly Body
*b
Plug Cap
Install the 4 No. 1 ignition coils to the cylinder head cover sub-assembly with the 4 bolts.
10 N*m
102 kgf*cm
7 ft.*lbf
Note:If a component has been dropped or subjected to a strong impact, replace it.
Install the same parts in the same combination to the original locations.
Tip:Perform "Inspection After Repairs" after replacing the ignition coil assembly (Click here).
Connect the 4 No. 1 ignition coil connectors.
Engage the clamp and install the wire harness to the cylinder head cover sub-assembly.
-
INSTALL NO. 1 ENGINE COVER