ENGINE UNIT REMOVAL

PROCEDURE

  1. REMOVE FUEL DELIVERY PIPE

  2. REMOVE FUEL INJECTOR ASSEMBLY

  3. REMOVE INTAKE MANIFOLD

  4. REMOVE EGR VALVE ASSEMBLY

  5. REMOVE NO. 1 IGNITION COIL

    1. Remove the 4 bolts and 4 No. 1 ignition coils.

  6. REMOVE NO. 2 RADIATOR HOSE

    1. Slide the clip and remove the No. 2 radiator hose from the water inlet.

  7. REMOVE VENTILATION HOSE

    1. Slide the clip and remove the ventilation hose from the cylinder head cover sub-assembly.

  8. REMOVE OIL LEVEL DIPSTICK GUIDE SUB-ASSEMBLY

  9. REMOVE NO. 1 EXHAUST MANIFOLD HEAT INSULATOR

  10. REMOVE NO. 2 EXHAUST MANIFOLD HEAT INSULATOR

  11. REMOVE MANIFOLD STAY

  12. REMOVE EXHAUST MANIFOLD CONVERTER SUB-ASSEMBLY (TWC: Front Catalyst)

  13. REMOVE NO. 1 WATER BY-PASS PIPE

    1. A196116

      Remove the bolt.

    2. Slide the clip and disconnect the hose to remove the No. 1 water by-pass pipe.

  14. REMOVE V-RIBBED BELT TENSIONER ASSEMBLY

    1. A249330

      Remove the 2 bolts and V-ribbed belt tensioner assembly.

  15. REMOVE STUD BOLT

    1. A296217

      Remove the stud bolt from the engine mounting bracket RH.