AUTOMATIC HEADLIGHT BEAM LEVEL CONTROL SYSTEM DIAGNOSIS SYSTEM
DESCRIPTION
Automatic headlight beam level control system data and Diagnostic Trouble Codes (DTCs) can be read from the Data Link Connector 3 (DLC3) of the vehicle. When the system seems to be malfunctioning, use the GTS to check for malfunctions and perform repairs.
CHECK DLC3
Check the DLC3.
INSPECT BATTERY VOLTAGE
Measure the battery voltage.
Standard Voltage
11 to 14 V
If the voltage is below 11 V, recharge or replace the battery.
DIAGNOSIS SYSTEM
If the automatic headlight beam level control system malfunctions, a warning message will be displayed on the multi-information display.
Tip:When the system returns to normal, the warning message will no longer be displayed on the multi-information display.