FUNCTION OF MAIN COMPONENTS
| Component | Function | |
|---|---|---|
| Transfer | Drive force input into the differential is redirected 90 degrees and output to the propeller shaft by the transfer. | |
| Electromagnetic Control Coupling (Transmission Coupling Assembly) | Electromagnetic Solenoid | Distributes drive torque in accordance with the amperage applied by the 4WD ECU assembly. |
| Throttle Position Sensor | Detects the throttle valve position and outputs it to the ECM. | |
| Crankshaft Position Sensor | Detects the engine speed and outputs it to the ECM. | |
| Speed Sensor | Detects the wheel speed of each wheel. | |
| Steering Sensor | Detects the direction and angle of the steering wheel. | |
| Park/Neutral Position Switch Assembly*1 | Detects the shift position of the transaxle and outputs it to the ECM. | |
| Stop Light Switch Assembly | Detects when the brake pedal is depressed. | |
| Parking Brake Switch | Detects when the parking brake is applied. | |
| Differential Lock Switch | Switches between Auto and Lock modes. | |
| 4WD ECU Assembly |
|
|
| ECM | Outputs signals such as the shift position signal*1, throttle position signal and engine speed signal to the 4WD ECU assembly via CAN communication. | |
| Skid Control ECU |
|
|
| Center Airbag Sensor Assembly
|
Detects the vehicle's yaw rate, longitudinal and lateral acceleration and sends the detection signals. | |
| Main Body ECU (Multiplex Network Body ECU) | Outputs signals such as the parking brake signal to the 4WD ECU assembly via CAN communication. | |
| Combination Meter Assembly | Differential Lock Indicator Light | Illuminates to inform the driver that 4WD/AWD lock mode is engaged. |
| 4WD Warning Light*2 | Illuminates to warn the driver if a malfunction occurs in the 4WD/AWD system. | |
| Master Warning Light*3 | Warns the driver by lighting up when a message is shown on the multi-information display. | |
| Multi-information Display*3 | Displays a warning message to inform or warn the driver of the system condition in accordance with signals from the 4WD ECU assembly. | |
*1: Models with automatic transaxle or CVT
*2: Models with analog type combination meter assembly
*3: Models with Optitron type combination meter assembly
SYSTEM CONTROL
| Control | Function | |
|---|---|---|
| Auto Mode Control | Starting Off Control | Performs control which distributes drive force to the rear wheels to ensure traction performance when starting off and avoid the tight corner braking phenomenon*, which occurs during cornering. |
| Normal Driving Control |
|
|
| Cornering Control | Uses pre-torque control, which is based on driver operation input, and yawrate feedback control, which is based on the vehicle status, to achieve the tracing performance desired by the driver. | |
| Braking Control | When braking, cancels 4WD/AWD to improve braking effectiveness. | |
| VSC Cooperative Control | When accelerating during cornering on slippery surfaces, etc., the dynamic torque control 4WD/AWD system and VSC function cooperate to perform control which achieves smoother acceleration and higher stability compared to previous TRC and VSC functions. As a result, smooth acceleration during turning is made possible. | |
| Lock Mode Control | When the vehicle is being driven in gravel or sand and more traction is required, the driver can select Lock mode by operating the differential lock switch. Thus, this mode achieves optimal control in accordance with the driving conditions and transmits as much drive torque as possible to the rear wheels, in a mode that is similar to the locked 4WD/AWD mode. | |
| Engine Output Control | If there is a possibility that overdriving could damage the powertrain system, engine output may be restricted. | |
Tech Tips
*: Tight corner braking phenomenon: a phenomenon in which a 4WD/AWD vehicle may lurch and decelerate due to a rotational speed difference between the front and rear wheels, such as during low-speed cornering in 4WD/AWD mode.
Auto Mode Control
Starting Off Control
The system ensures start-off performance by optimally distributing engine drive torque to the front and rear wheels.
To prevent the tight corner braking phenomenon from occurring during low-speed cornering, the system reduces the amount of torque distributed to the rear wheels.
| *a | Straightline Driving | *b | Low-speed Cornering |
|
Torque Distribution to Rear Wheels | - | - |
Normal Driving Control
During normal driving, when the system judges that the vehicle is traveling steadily, it reduces the amount of torque distribution to the rear wheels. This allows the vehicle to operate in conditions similar to front-wheel-drive, improving fuel economy.
The system optimizes torque distribution to the rear wheels to ensure both excellent straightline acceleration performance and excellent driving stability while cornering.
| *a | Steady Driving | *b | Straightline Acceleration |
|
Torque Distribution to Rear Wheels | - | - |
Cornering Control
The desired driving path of the driver is estimated using information such as the vehicle speed, steering angle, etc., to change drive force distribution according to driving conditions. As a result, excellent driving stability is ensured.
Pre-torque control, which is based on driver operation input, and yawrate feedback control, which is based on the vehicle status, are used to correct vehicle oversteer and understeer and achieve the tracing performance desired by the driver.
Pre-torque control is linked with driver steering wheel operations and distributes drive force to the rear wheels to improve steering performance when entering a corner (front and rear drive force distribution is 90:10).
Yawrate feedback control performs high-speed computation of the ideal yaw rate (calculated by the 4WD ECU assembly when the vehicle is in motion) and actual yaw rate, detects vehicle steering characteristics (oversteer or understeer), and performs optimal control to distribute drive force to the front or rear wheels if required for correction (front and rear drive force distribution changes from 90:10 to 50:50).
| *a | Yawrate Feedback Control | *b | Understeer Tendency |
| *c | Target Line | *d | Oversteer Tendency |
| *e | Drive Force Distribution to Rear Wheels Increased | *f | Drive Force Distribution to Rear Wheels Reduced |
| *g | Pre-torque Control | - | - |
FUNCTION
4WD/AWD Operation Condition Display (Models with Optitron Type Combination Meter Assembly)
The operation condition of the 4WD/AWD system, which automatically operates according to the longitudinal acceleration, lateral acceleration and steering angle of the vehicle during driving, is shown on the multi-information display.
The user can recognize how the 4WD/AWD system is operating in response to various conditions, even on slippery roads. This contributes to improved safety while driving with the 4WD/AWD system.
The driver can operate the steering pad switch to select whether to display or hide the 4WD/AWD system operation condition.
| Multi-information Display | Outline |
|---|---|
|
|
FAIL-SAFE
When there is a possibility of causing damage to the drivetrain due to a malfunction in the 4WD/AWD system or rough driving, the system illuminates or blinks the 4WD warning light*1 or master warning light*2, displays a warning message on the multi-information display*2 to inform the driver and stops 4WD/AWD control.
| Condition | Control | 4WD Warning Light*1 or Master Warning Light*2 | Multi-information Display*2 |
|---|---|---|---|
| 4WD/AWD system malfunction | 2WD driving (control prohibited) | Illuminates | AWD System Malfunction 2WD Mode Engaged Visit Your Dealer |
| 4WD/AWD excess driving (warning before AWD control is prohibited) | 4WD/AWD driving | Slowly Blinks | AWD System Overheated Switching to 2WD Mode |
| 4WD/AWD excess driving | 2WD driving (control prohibited) | Quickly Blinks | AWD System Overheated 2WD Mode Engaged |
When the 4WD ECU assembly judges that the vehicle has stabilized, it resumes 4WD/AWD mode. If the 4WD warning light*1 or master warning light*2 blinks and displays a warning message on the multi-information display*2, take the following actions without turning the engine off:
Decelerate the vehicle until the light goes out.
Stop the vehicle and wait until the light goes out.
*1: Models with analog type combination meter assembly
*2: Models with Optitron type combination meter assembly
DIAGNOSIS
Furthermore, the 4WD warning light*1 or master warning light*2 in the combination meter assembly illuminates and a warning message is displayed on the multi-information display*2 to inform the driver.
*1: Models with analog type combination meter assembly
*2: Models with Optitron type combination meter assembly
For details of the DTCs that are stored in 4WD ECU assembly memory, refer to the Repair Manual.