ENGINE UNIT(w/o Glow Plug Controller) REPLACEMENT

PROCEDURE

  1. REPLACE STUD BOLT

    Note:

    If any of the stud bolts is deformed or the threads are damaged, replace it.

    1. Using an E6 and E8 "TORX" socket wrench, remove the 4 stud bolts.

    2. Using an E6 and E8 "TORX" socket wrench, install the 4 stud bolts.

      A198489C01

      *a

      LH Side

      *b

      Lower Side

      Stud bolt A

      5.0 N*m

      51 kgf*cm

      44 in.*lbf

      Stud bolt B

      10 N*m

      102 kgf*cm

      7 ft.*lbf