AUDIO AND VISUAL SYSTEM(for Radio Receiver Type) Speaker Circuit

DTC Code DTC Name
Speaker Circuit

DESCRIPTION

The sound signals amplified by the radio receiver assembly are sent to the speakers from the radio receiver assembly via the speaker circuit.

If there is a short in a speaker circuit, the radio receiver assembly detects it and stops output to the speakers.

Thus sound cannot be heard from the speakers even if there is no malfunction in the radio receiver assembly or speakers.

If a short is detected in a speaker circuit, no sound can be heard from the speakers.

WIRING DIAGRAM

  1. except Sedan

    E256653E04
  2. for 4 Speakers (for Sedan)

    E275897E01
  3. for 6 Speakers (for Sedan)

    E238696E13

PROCEDURE

  1. CONFIRM MODEL

    1. Choose the model to be inspected.

      Result

      Result

      Proceed to

      except Sedan

      A

      for 4 Speakers (for Sedan)

      B

      for 6 Speakers (for Sedan)

      C

    B

    CHECK HARNESS AND CONNECTORClick here

    C

    CHECK HARNESS AND CONNECTORClick here

    A
  2. CHECK HARNESS AND CONNECTOR

    1. Disconnect the E109 radio receiver assembly connector.

    2. Disconnect the G1 and H1 front No. 1 speaker assembly connectors.

    3. Disconnect the G4 and H5 front No. 2 speaker assembly connectors.

    4. Measure the resistance between each of the front No. 2 speaker assemblies and the radio receiver assembly to check for an open circuit in the wire harness.

      Standard Resistance

      Tester Connection

      Condition

      Specified Condition

      E109-1 (FR+) - G4-4 (TWR+)

      Always

      Below 1 Ω

      E109-5 (FR-) - G4-2 (TWR-)

      Always

      Below 1 Ω

      E109-2 (FL+) - H5-4 (TWL+)

      Always

      Below 1 Ω

      E109-6 (FL-) - H5-2 (TWL-)

      Always

      Below 1 Ω

    5. Measure the resistance between each of the front No. 1 speaker assemblies and the front No. 2 speaker assemblies to check for an open circuit in the wire harness.

      Standard Resistance

      Tester Connection

      Condition

      Specified Condition

      G4-3 (+) - G1-1

      Always

      Below 1 Ω

      G4-1 (-) - G1-2

      Always

      Below 1 Ω

      H5-3 (+) - H1-1

      Always

      Below 1 Ω

      H5-1 (-) - H1-2

      Always

      Below 1 Ω

    6. Measure the resistance between the radio receiver assembly and body ground to check for a short circuit in the wire harness.

      Standard Resistance

      Tester Connection

      Condition

      Specified Condition

      E109-1 (FR+) - Body ground

      Always

      10 kΩ or higher

      E109-5 (FR-) - Body ground

      Always

      10 kΩ or higher

      E109-2 (FL+) - Body ground

      Always

      10 kΩ or higher

      E109-6 (FL-) - Body ground

      Always

      10 kΩ or higher

    7. Measure the resistance between each of the front No. 2 speaker assemblies and body ground to check for a short circuit in the wire harness.

      Standard Resistance

      Tester Connection

      Condition

      Specified Condition

      G4-3 (+) - Body ground

      Always

      10 kΩ or higher

      G4-1 (-) - Body ground

      Always

      10 kΩ or higher

      H5-3 (+) - Body ground

      Always

      10 kΩ or higher

      H5-1 (-) - Body ground

      Always

      10 kΩ or higher

    Result

    Proceed to

    OK

    NG

    NG

    REPAIR OR REPLACE HARNESS OR CONNECTOR

    OK
  3. INSPECT FRONT NO. 1 SPEAKER ASSEMBLY

    1. Remove the front No. 1 speaker assembly.

      for Sedan:Click here

      for Hatchback, Wagon:Click here

    2. E219303C37

      *a

      Component without harness connected

      (Front No. 1 Speaker Assembly)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance

      Tester Connection

      Condition

      Specified Condition

      1 - 2

      Always

      3.2 to 4.8 Ω

    Result

    Proceed to

    OK

    NG

    NG

    REPLACE FRONT NO. 1 SPEAKER ASSEMBLY

    for Sedan:Click here

    for Hatchback, Wagon:Click here

    OK
  4. INSPECT FRONT NO. 2 SPEAKER ASSEMBLY

    1. Remove the front No. 2 speaker assembly.

      for Sedan:Click here

      for Hatchback, Wagon:Click here

    2. E226097C16

      *A

      for RH

      *B

      for LH

      *a

      Component without harness connected

      (Front No. 2 Speaker Assembly)

      Measure the resistance according to the value(s) in the table below.

    Standard Resistance

    Table 1. for RH

    Tester Connection

    Condition

    Specified Condition

    4 (TWR+) - 2 (TWR-)

    Always

    10 kΩ or higher

    1 (-) - 2 (TWR-)

    Always

    Below 1 Ω

    3 (+) - 4 (TWR+)

    Always

    Below 1 Ω

    Table 2. for LH

    Tester Connection

    Condition

    Specified Condition

    4 (TWL+) - 2 (TWL-)

    Always

    10 kΩ or higher

    1 (-) - 2 (TWL-)

    Always

    Below 1 Ω

    3 (+) - 4 (TWL+)

    Always

    Below 1 Ω

    Result

    Proceed to

    OK

    NG

    NG

    REPLACE FRONT NO. 2 SPEAKER ASSEMBLY

    for Sedan:Click here

    for Hatchback, Wagon:Click here

    OK
  5. REPLACE FRONT NO. 2 SPEAKER ASSEMBLY

    1. Check that the malfunction disappears when a known good speaker is installed.

      for Sedan:Click here

      for Hatchback, Wagon:Click here

      OK

      Malfunction disappears.

      Tip:
      • Connect all the connectors to the front No. 2 speaker assemblies that were disconnected.

      • When there is a possibility that either the right or left front No. 2 speaker assembly is defective, inspect by interchanging the right one with the left one.

      • Perform the above inspection on both LH and RH sides.

    Result

    Proceed to

    OK

    NG

    OK

    END (FRONT NO. 2 SPEAKER ASSEMBLY WAS DEFECTIVE)

    NG

    PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE

  6. CHECK HARNESS AND CONNECTOR

    1. Disconnect the E109 and E110 radio receiver assembly connectors.

    2. Disconnect the G1 and H1 front No. 1 speaker assembly connectors.

    3. Disconnect the L79 and L80 rear speaker assembly connectors.

    4. Measure the resistance between each of the front No. 1 speaker assemblies and the radio receiver assembly to check for an open circuit in the wire harness.

      Standard Resistance

      Tester Connection

      Condition

      Specified Condition

      E109-1 (FR+) - G1-1

      Always

      Below 1 Ω

      E109-5 (FR-) - G1-2

      Always

      Below 1 Ω

      E109-2 (FL+) - H1-1

      Always

      Below 1 Ω

      E109-6 (FL-) - H1-2

      Always

      Below 1 Ω

    5. Measure the resistance between each of the rear speaker assemblies and the radio receiver assembly to check for an open circuit in the wire harness.

      Standard Resistance

      Tester Connection

      Condition

      Specified Condition

      E110-1 (RR+) - L79-1

      Always

      Below 1 Ω

      E110-3 (RR-) - L79-2

      Always

      Below 1 Ω

      E110-2 (RL+) - L80-1

      Always

      Below 1 Ω

      E110-6 (RL-) - L80-2

      Always

      Below 1 Ω

    6. Measure the resistance between the radio receiver assembly and body ground to check for a short circuit in the wire harness.

      Standard Resistance

      Tester Connection

      Condition

      Specified Condition

      E109-1 (FR+) - Body ground

      Always

      10 kΩ or higher

      E109-5 (FR-) - Body ground

      Always

      10 kΩ or higher

      E109-2 (FL+) - Body ground

      Always

      10 kΩ or higher

      E109-6 (FL-) - Body ground

      Always

      10 kΩ or higher

      E110-1 (RR+) - Body ground

      Always

      10 kΩ or higher

      E110-3 (RR-) - Body ground

      Always

      10 kΩ or higher

      E110-2 (RL+) - Body ground

      Always

      10 kΩ or higher

      E110-6 (RL-) - Body ground

      Always

      10 kΩ or higher

    Result

    Proceed to

    OK

    NG

    NG

    REPAIR OR REPLACE HARNESS OR CONNECTOR

    OK
  7. INSPECT FRONT NO. 1 SPEAKER ASSEMBLY

    1. Remove the front No. 1 speaker assembly.

      for Sedan:Click here

      for Hatchback, Wagon:Click here

    2. E219303C37

      *a

      Component without harness connected

      (Front No. 1 Speaker Assembly)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance

      Tester Connection

      Condition

      Specified Condition

      1 - 2

      Always

      3.2 to 4.8 Ω

    Result

    Proceed to

    OK

    NG

    NG

    REPLACE FRONT NO. 1 SPEAKER ASSEMBLY

    for Sedan:Click here

    for Hatchback, Wagon:Click here

    OK
  8. INSPECT REAR SPEAKER ASSEMBLY

    1. Remove the rear speaker assembly.

      Click here

    2. E219303C37

      *a

      Component without harness connected

      (Rear Speaker Assembly)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance

      Tester Connection

      Condition

      Specified Condition

      1 - 2

      Always

      3.2 to 4.8 Ω

    Result

    Proceed to

    OK

    NG

    OK

    PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE

    NG

    REPLACE REAR SPEAKER ASSEMBLY

  9. CHECK HARNESS AND CONNECTOR

    1. Disconnect the E109 and E110 radio receiver assembly connectors.

    2. Disconnect the G1 and H1 front No. 1 speaker assembly connectors.

    3. Disconnect the G4 and H5 front No. 2 speaker assembly connectors.

    4. Disconnect the L79 and L80 rear speaker assembly connectors.

    5. Measure the resistance between each of the front No. 2 speaker assemblies and the radio receiver assembly to check for an open circuit in the wire harness.

      Standard Resistance

      Tester Connection

      Condition

      Specified Condition

      E109-1 (FR+) - G4-4 (TWR+)

      Always

      Below 1 Ω

      E109-5 (FR-) - G4-2 (TWR-)

      Always

      Below 1 Ω

      E109-2 (FL+) - H5-4 (TWL+)

      Always

      Below 1 Ω

      E109-6 (FL-) - H5-2 (TWL-)

      Always

      Below 1 Ω

    6. Measure the resistance between each of the front No. 1 speaker assemblies and the front No. 2 speaker assemblies to check for an open circuit in the wire harness.

      Standard Resistance

      Tester Connection

      Condition

      Specified Condition

      G4-3 (+) - G1-1

      Always

      Below 1 Ω

      G4-1 (-) - G1-2

      Always

      Below 1 Ω

      H5-3 (+) - H1-1

      Always

      Below 1 Ω

      H5-1 (-) - H1-2

      Always

      Below 1 Ω

    7. Measure the resistance between each of the rear speaker assemblies and the radio receiver assembly to check for an open circuit in the wire harness.

      Standard Resistance

      Tester Connection

      Condition

      Specified Condition

      E110-1 (RR+) - L79-1

      Always

      Below 1 Ω

      E110-3 (RR-) - L79-2

      Always

      Below 1 Ω

      E110-2 (RL+) - L80-1

      Always

      Below 1 Ω

      E110-6 (RL-) - L80-2

      Always

      Below 1 Ω

    8. Measure the resistance between the radio receiver assembly and body ground to check for a short circuit in the wire harness.

      Standard Resistance

      Tester Connection

      Condition

      Specified Condition

      E109-1 (FR+) - Body ground

      Always

      10 kΩ or higher

      E109-5 (FR-) - Body ground

      Always

      10 kΩ or higher

      E109-2 (FL+) - Body ground

      Always

      10 kΩ or higher

      E109-6 (FL-) - Body ground

      Always

      10 kΩ or higher

      E110-1 (RR+) - Body ground

      Always

      10 kΩ or higher

      E110-3 (RR-) - Body ground

      Always

      10 kΩ or higher

      E110-2 (RL+) - Body ground

      Always

      10 kΩ or higher

      E110-6 (RL-) - Body ground

      Always

      10 kΩ or higher

    9. Measure the resistance between each of the front No. 2 speaker assemblies and body ground to check for a short circuit in the wire harness.

      Standard Resistance

      Tester Connection

      Condition

      Specified Condition

      G4-3 (+) - Body ground

      Always

      10 kΩ or higher

      G4-1 (-) - Body ground

      Always

      10 kΩ or higher

      H5-3 (+) - Body ground

      Always

      10 kΩ or higher

      H5-1 (-) - Body ground

      Always

      10 kΩ or higher

    Result

    Proceed to

    OK

    NG

    NG

    REPAIR OR REPLACE HARNESS OR CONNECTOR

    OK
  10. INSPECT FRONT NO. 1 SPEAKER ASSEMBLY

    1. Remove the front No. 1 speaker assembly.

      for Sedan:Click here

      for Hatchback, Wagon:Click here

    2. E219303C37

      *a

      Component without harness connected

      (Front No. 1 Speaker Assembly)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance

      Tester Connection

      Condition

      Specified Condition

      1 - 2

      Always

      3.2 to 4.8 Ω

    Result

    Proceed to

    OK

    NG

    NG

    REPLACE FRONT NO. 1 SPEAKER ASSEMBLY

    for Sedan:Click here

    for Hatchback, Wagon:Click here

    OK
  11. INSPECT FRONT NO. 2 SPEAKER ASSEMBLY

    1. Remove the front No. 2 speaker assembly.

      for Sedan:Click here

      for Hatchback, Wagon:Click here

    2. E226097C16

      *A

      for RH

      *B

      for LH

      *a

      Component without harness connected

      (Front No. 2 Speaker Assembly)

      Measure the resistance according to the value(s) in the table below.

    Standard Resistance

    Table 3. for RH

    Tester Connection

    Condition

    Specified Condition

    4 (TWR+) - 2 (TWR-)

    Always

    10 kΩ or higher

    1 (-) - 2 (TWR-)

    Always

    Below 1 Ω

    3 (+) - 4 (TWR+)

    Always

    Below 1 Ω

    Table 4. for LH

    Tester Connection

    Condition

    Specified Condition

    4 (TWL+) - 2 (TWL-)

    Always

    10 kΩ or higher

    1 (-) - 2 (TWL-)

    Always

    Below 1 Ω

    3 (+) - 4 (TWL+)

    Always

    Below 1 Ω

    Result

    Proceed to

    OK

    NG

    NG

    REPLACE FRONT NO. 2 SPEAKER ASSEMBLY

    for Sedan:Click here

    for Hatchback, Wagon:Click here

    OK
  12. REPLACE FRONT NO. 2 SPEAKER ASSEMBLY

    1. Check that the malfunction disappears when a known good speaker is installed.

      for Sedan:Click here

      for Hatchback, Wagon:Click here

      OK

      Malfunction disappears.

      Tip:
      • Connect all the connectors to the front No. 2 speaker assemblies that were disconnected.

      • When there is a possibility that either the right or left front No. 2 speaker assembly is defective, inspect by interchanging the right one with the left one.

      • Perform the above inspection on both LH and RH sides.

    Result

    Proceed to

    OK

    NG

    OK

    END (FRONT NO. 2 SPEAKER ASSEMBLY WAS DEFECTIVE)

    NG
  13. INSPECT REAR SPEAKER ASSEMBLY

    1. Remove the rear speaker assembly.

      Click here

    2. E219303C37

      *a

      Component without harness connected

      (Rear Speaker Assembly)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance

      Tester Connection

      Condition

      Specified Condition

      1 - 2

      Always

      3.2 to 4.8 Ω

    Result

    Proceed to

    OK

    NG

    OK

    PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE

    NG

    REPLACE REAR SPEAKER ASSEMBLY