ENGINE UNIT(w/ Glow Plug Controller) REPLACEMENT
PROCEDURE
REPLACE STUD BOLT
Note:If any of the stud bolts is deformed or the threads are damaged, replace it.
Using E6 and E8 "TORX" socket wrenches, remove the 4 stud bolts from the oil pan sub-assembly.
*a
Lower Side
*b
LH Side
Using E6 and E8 "TORX" socket wrenches, install the 4 stud bolts to the oil pan sub-assembly.
*a
Lower Side
*b
LH Side
*c
24 mm (0.945 in.)
*d
14 mm (0.551 in.)
*e
9 mm (0.354 in.)
*f
80 mm (3.15 in.)
*g
27 mm (1.06 in.)
*h
13 mm (0.512 in.)
Stud bolt (A)
5.0 N*m
51 kgf*cm
44 in.*lbf
Stud bolt (B)
10 N*m
102 kgf*cm
7 ft.*lbf