REAR COMBINATION LIGHT ASSEMBLY(for Sedan) REMOVAL
CAUTION / NOTICE / HINT
Tip:
Use the same procedure for the RH and LH sides.
The procedure described below is for the LH side.
PROCEDURE
REMOVE REAR COMBINATION LIGHT ASSEMBLY
-

Protective Tape
Apply protective tape around the rear combination light assembly.
-
Remove the 2 clips.
-
Turn back the luggage compartment trim cover assembly as shown in the illustration.
-
Disconnect the 2 connectors.
Disengage the 2 clamps.
Remove the 3 nuts.
-
Disengage the guide to remove the rear combination light assembly as shown in the illustration.
-