METER / GAUGE SYSTEM, Diagnostic DTC:U0100,U0129,U0131,U0142 and U0151
| DTC Code | DTC Name |
|---|---|
| U0100 | Lost Communication with ECM / PCM "A" |
| U0129 | Lost Communication with Brake System Control Module |
| U0131 | Lost Communication with Power Steering Control Module |
| U0142 | Lost Communication with Body Control Module "B" |
| U0151 | Lost Communication with Restraints Control Module |
DESCRIPTION
The combination meter assembly communicates with the ECM, skid control ECU, power steering ECU assembly, main body ECU (multiplex network body ECU) and airbag sensor assembly via the CAN communication system.
DTC No. |
Detection Item |
DTC Detection Condition |
Trouble Area |
Memory |
Note |
|---|---|---|---|---|---|
U0100 |
Lost Communication with ECM / PCM "A" |
When IG voltage is 9.5 V or more and the following condition is detected:
|
|
DTC stored |
- |
U0129 |
Lost Communication with Brake System Control Module |
When IG voltage is 9.5 V or more and the following condition is detected:
|
|
DTC stored |
- |
U0131 |
Lost Communication with Power Steering Control Module |
When IG voltage is 9.5 V or more and the following condition is detected:
|
|
DTC stored |
- |
U0142 |
Lost Communication with Body Control Module "B" |
When IG voltage is 9.5 V or more and the following condition is detected:
|
|
DTC stored |
This DTC is stored only on vehicles with the segment LCD type multi-information display. |
U0151 |
Lost Communication with Restraints Control Module |
When IG voltage is 9.5 V or more and the following condition is detected:
|
|
DTC stored |
- |
PROCEDURE
CHECK CAN COMMUNICATION SYSTEM
Check if CAN communication DTCs are output.
Result
Result
Proceed to
CAN communication DTCs are output.
A
CAN communication DTCs are not output.
B
Tip:If CAN communication system DTC U0100, U0129, U0131, U0142 or U0151 and another DTC are output at the same time, perform troubleshooting for CAN communication system DTC U0100, U0129, U0131, U0142 or U0151 first.