REAR BUMPER REMOVAL

PROCEDURE


  1. REMOVE NO. 1 REAR BUMPER PLATE

    Tech Tips

    Use the same procedure for the RH side and LH side.


    1. A01O9F1C01
      *a Hook
      B008GB8 Protective Tape

      Using a screwdriver with its tip wrapped with protective tape, disengage the 2 claws.

    2. Disengage the hook to remove the No. 1 rear bumper plate.

  2. REMOVE REAR BUMPER ASSEMBLY


    1. A01O9V5C01
      B008GB8 Protective Tape

      Apply protective tape around the rear bumper assembly as shown in the illustration.

    2. A01OC9D

      Remove the 2 bolts.

    3. A01O9DE

      Using a clip remover, remove the 6 clips.

    4. A01OADT

      Remove the screw.

      Tech Tips

      Use the same procedure for the RH side and LH side.

    5. Disengage the claw.

      Tech Tips

      Use the same procedure for the RH side and LH side.

    6. A01OBVNC01
      *a Screwdriver
      B008GB8 Protective Tape

      Using a screwdriver with its tip wrapped with protective tape, disengage the 6 claws as shown in the illustration.

      Tech Tips

      Use the same procedure for the RH side and LH side.

    7. A01OAB4

      Disengage the 6 claws and remove the rear bumper assembly as shown in the illustration.

    8. w/ LEXUS Parking Assist-sensor System:


      1. Disconnect the connector.