FRONT DOOR BELT MOULDING INSTALLATION
CAUTION / NOTICE / HINT
Use the same procedure for the RH and LH sides.
The procedure described below is for the LH side.
PROCEDURE
INSTALL FRONT DOOR BELT MOULDING ASSEMBLY
Resin Type:
-
Engage the 6 claws to install the front door belt moulding assembly.
-
Plating Type:
-
Engage the 5 claws to install the front door belt moulding assembly.
-
INSTALL FRONT DOOR GLASS SUB-ASSEMBLY
for Hatchback, Wagon:Click hereClick here
for Sedan:Click hereClick here
INSTALL FRONT DOOR SERVICE HOLE COVER
for Hatchback, Wagon:Click hereClick here
for Sedan:Click hereClick here
INSTALL OUTER REAR VIEW MIRROR ASSEMBLY WITH COVER
INITIALIZE POWER WINDOW CONTROL SYSTEM
for Models with Jam Protection Function on 4 Windows:Click here
for Models with Jam Protection Function on Driver Door Window Only:Click here
INSPECT POWER WINDOW OPERATION
for Models with Jam Protection Function on 4 Windows:Click here
for Models with Jam Protection Function on Driver Door Window Only:Click hereClick here