NAVIGATION ECU(for Hatchback, Wagon) REMOVAL
PROCEDURE
REMOVE LOWER NO. 2 INSTRUMENT PANEL FINISH PANEL
REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY
REMOVE RADIO RECEIVER ASSEMBLY WITH BRACKET
REMOVE NAVIGATION ECU WITH BRACKET
-
Disconnect the connector.
-
Disconnect the 2 connectors.
-
Remove the screw.
-
Remove the screw and navigation ECU with bracket.
-
REMOVE NO. 1 RADIO RECEIVER BRACKET
-
Remove the screw and No. 1 radio receiver bracket.
-
REMOVE NO. 2 RADIO RECEIVER BRACKET
-
Remove the screw and No. 2 radio receiver bracket.
-
REMOVE ANTENNA CORD SUB-ASSEMBLY
-
Disconnect the connector.
Disengage the clamp to remove the antenna cord sub-assembly.
-
REMOVE NO. 1 NAVIGATION WIRE
-
Disconnect the 2 connectors to remove the No. 1 navigation wire.
-
REMOVE NAVIGATION ECU