FUNCTION OF MAIN COMPONENTS
| Component | Function | |
|---|---|---|
| Forward Recognition Camera |
|
|
| Camera Heater (Forward Recognition Hood with Heater Sub-assembly)* | The camera heater is heated according to signals from the forward recognition camera. | |
| Center Airbag Sensor Assembly | Detects the yaw rate of the vehicle and transmits the signal to the forward recognition camera. | |
| Skid Control ECU | Transmits the speed sensor signal to the forward recognition camera. | |
| ECM | Transmits the shift position signal to the forward recognition camera. | |
| Combination Meter Assembly | Automatic High Beam Indicator Light | The automatic high beam indicator light illuminates (green) to inform the driver when the Automatic High Beam (AHB) system is activated. |
| Multi-information Display | The automatic warning message is displayed to inform the driver when a malfunction is detected in this system. | |
| Headlight High Beam Indicator Light | The headlight high beam indicator light illuminates (blue) to inform the driver when the high beam headlights are on. | |
| Main Body ECU (Multiplex Network Body ECU) |
|
|
| Headlight Dimmer Switch Assembly | Light Control Switch | The light control switch transmits the auto position signal and the high beam position signal to the main body ECU. |
| Driving Support ECU Assembly | Transmits the forward recognition camera signal to the main body ECU. | |
*: Models with camera heater
SYSTEM CONTROL
The Automatic High Beam (AHB) system operates as follows:
| Condition | Details |
|---|---|
| System Activation | When all of the following conditions are met, the AHB system is activated and the automatic high beam indicator light turns on:
|
| High Beam Headlight On | When all of the following conditions are met, the AHB system turns on the high beam headlights after a short delay:
|
| High Beam Headlight Off | When any of the following conditions are met, the automatic system turns off the high beam headlights after a short delay:
|
FUNCTION
When passing an oncoming vehicle
The Automatic High Beam (AHB) system turns the high beam headlights off when there is an oncoming vehicle before its distance reaches approximately 800 m (2625 ft.).
When an oncoming vehicle passes the forward recognition camera range, the AHB system turns the high beam headlights on after a short delay.
| *a | Approx. 800 m (2625 ft.) | *b | Delay |
| *c | Camera Angle | - | - |
When passing a preceding vehicle
The AHB system turns the high beam headlights off when there is a preceding vehicle before its distance reaches approximately 600 m (1969 ft.).
When a preceding vehicle passes the forward recognition camera range, the AHB system turns the high beam headlights on after a short delay.
| *a | Approx. 600 m (1969 ft.) | *b | Delay |
| *c | Camera Angle | - | - |