IMMOBILISER SYSTEM(w/o Entry and Start System), Diagnostic DTC:B279C
| DTC Code | DTC Name |
|---|---|
| B279C | Theft Deterrent System Presence Detection |
DESCRIPTION
If an ECM that is incompatible with the immobiliser system is installed, the ECM stores this DTC.
DTC No. |
Detection Item |
DTC Detection Condition |
Trouble Area |
Note |
|---|---|---|---|---|
B279C |
Theft Deterrent System Presence Detection |
An ECM that is incompatible with immobiliser system is installed. |
ECM |
|
Vehicle Condition when Malfunction Detected |
Fail-safe Operation when Malfunction Detected |
|---|---|
Engine cannot be started |
- |
DTC No. |
Data List and Active Test |
|---|---|
B279C |
- |
CAUTION / NOTICE / HINT
If the ECM is replaced, refer to Service Bulletin.
After repair, confirm that no DTCs are output by performing "DTC Output Confirmation Operation".
PROCEDURE
CLEAR DTC
Clear the DTCs.
Powertrain > Engine and ECT > Clear DTCs
Powertrain > Engine and ECT > Clear DTCs
Result
Proceed to
NEXT
CHECK FOR DTC
Start the engine.
Check for DTCs.
Powertrain > Engine and ECT > Trouble Codes
Powertrain > Engine and ECT > Trouble Codes
Tip:Before checking for DTCs, perform the "DTC Output Confirmation Operation" procedure.
OK
DTC B279C is not output.
Result
Result
Proceed to
DTC B279C is not output
A
DTC B279C is output
B
REPLACE CURRENT ECM WITH PROPER ECM
Replace the current ECM with the proper ECM.
for 1AD-FTV:Click here
for 1ND-TV:Click here
for 1NR-FE:Click here
for 1ZR-FAE:Click here
for 1ZR-FE:Click here
for 2ZR-FE:Click here
Result
Proceed to
NEXT
NEXT END