LUBRICATION SYSTEM


  1. OUTLINE


    1. This lubrication method uses a full pressure-feeding and full filtration system using the oil pump.

    2. Engine oil pressure-fed to the top of the cylinder head sub-assembly flows through the oil return hole provided on the cylinder head sub-assembly or the inside of the timing chain cover assembly and returns to the oil pan sub-assembly.

    3. The Variable Valve Timing-intelligent Wide (VVT-iW) and Variable Valve Timing-intelligent (VVT-i) systems are used. These systems are operated by the engine oil.

    4. A piston jet control system is used to control the injection and stop of engine oil from the piston jets (No. 1 oil nozzle sub-assemblies).

    5. An oil pressure switching valve assembly for piston jet control system and relief valve are provided for the oil pump relief valve housing assembly.

    6. 2 separate oil galleries in the cylinder block sub-assembly, a main oil gallery for the crank journal oil passage and a sub oil gallery for the piston jet passage, are used.

      A001N9MC01
      *1 Oil Delivery Pipe *2 Oil Pump Relief Valve Housing Assembly
      *3 Oil Filter Sub-assembly *4 Oil Pump Assembly