FEATURES PERFORMANCE


  1. OUTLINE


    1. 1AR-FE Engine


      1. The 1AR-FE engine is an in-line 2.7-liter, 16-valve DOHC engine. This engine uses a Dual Variable Valve Timing-intelligent (VVT-i) system, Direct Ignition System (DIS), Acoustic Control Induction System (ACIS) and Electronic Throttle Control System-intelligent (ETCS-i). These control functions achieve improved engine performance, fuel economy, and clean emissions.

        A019Q9E
        Item Specification
        No. of Cyls. & Arrangement 4-cylinder, In-line
        Valve Mechanism 16-valve DOHC with Dual VVT-i
        Fuel System SFI
        Displacement

        2672 cm3(163.0 cu. in.)

        Max. Output 138 kW@5800 rpm
        Max. Torque 252 N*m@4200 rpm
    2. 2GR-FE Engine


      1. The 2GR-FE engine is a 3.5-liter, 24-valve DOHC V6 engine. This engine uses a Dual VVT-i (Variable Valve Timing-intelligent) system, Direct Ignition System (DIS), Acoustic Control Induction System (ACIS) and Electronic Throttle Control System-intelligent (ETCS-i). These control functions achieve improved engine performance, fuel economy, and clean emissions.

        A019PWE
        Item Specification
        No. of Cyls. & Arrangement 6-cylinder, V-type
        Valve Mechanism 24-valve DOHC with Dual VVT-i
        Fuel System SFI
        Displacement

        3456 cm3(210.9 cu. in.)

        Max. Output Models for Europe* 204 kW@6200 rpm
        Models for G.C.C. Countries 205 kW@6200 rpm
        Max. Torque Models for Europe* 346 N*m@4700 rpm
        Models for G.C.C. Countries 348 N*m@4700 rpm

        *: Destination packages for Australia, China and others are included.

    3. U660F Automatic Transaxle


      1. A U660F 6-speed multi-mode automatic transaxle is used.

        A019PMNE01
        Transaxle Type U660F (AWD)
        Combination with Transfer MF1A
        Gear Ratio 1st 3.300
        2nd 1.900
        3rd 1.420
        4th 1.000
        5th 0.713
        6th 0.608
        Reverse 4.148
        Differential Gear Ratio* 4.398

        *: Counter gear ratio included

    4. U760E Automatic Transaxle


      1. A U760E 6-speed multi-mode automatic transaxle is used.

        A019Q6B
        Transaxle Type U760E (2WD)
        Combination with Engine 1AR-FE
        Combination with Transfer -
        Gear Ratio 1st 3.300
        2nd 1.900
        3rd 1.420
        4th 1.000
        5th 0.713
        6th 0.608
        Reverse 4.148
        Differential Gear Ratio* 4.356

        *: Counter gear ratio included

    5. Active Torque Control 4WD System


      1. An active torque control 4WD system with an electromagnetic control coupling is used. The active torque control 4WD system has an electromagnetic control coupling in the front part of the rear differential. The coupling transmits torque to the rear wheels when needed, and only in the amount needed, based on information provided by various sensors.

        A019PSFE01
      2. A compact and lightweight FD15CE differential with an integrated electromagnetic control coupling is used.

        Rear Differential Type FD15CE
        Gear Ratio 2.277
        Drive Pinion No. of Teeth 18
        Ring Gear No. of Teeth 41
        No. of Differential Pinions 2
    6. Suspension


      1. A MacPherson strut type independent suspension is used for the front.

      2. A trailing arm type double wishbone independent suspension is used for the rear.

        A019Q96
    7. Air Suspension


      1. The air suspension uses pneumatic cylinders instead of the coil springs that are used in a conventional suspension.

      2. The pressures in the pneumatic cylinders are controlled by the height control compressor assembly, achieving both handling stability and improved vehicle accessibility.

        A019PYWE01
        Text in Illustration
        *1 Front Pneumatic Cylinder Assembly RH *2 Front Pneumatic Cylinder Assembly LH
        *3 Rear Pneumatic Cylinder Assembly RH *4 Rear Pneumatic Cylinder Assembly LH
        *5 Height Control Compressor Assembly - -
    8. Steering


      1. The Electric Power Steering (EPS) system uses a power steering motor, a power steering torque sensor and a reduction mechanism that are built into the steering column assembly to generate assist torque, in order to assist the driver's steering effort.

        A019PZME01
        Text in Illustration
        *1 Steering Gear Assembly *2 Steering Column Assembly
    9. Brake

      Item Specification
      Front Brake Type Ventilated Disc
      Rotor Size (D X T)* Models for Europe and G.C.C. Countries 328 X 34 mm (12.9 X 1.3 in.)
      Destination Package for Australia, China and Others 328 X 28 mm (12.9 X 1.1 in.)
      Rear Brake Type Models for Europe and G.C.C. Countries Ventilated Disc
      Destination Package for Australia, China and Others Solid Disc
      Rotor Size (D X T)* Models for Europe and G.C.C. Countries 309 X 18 mm (12.2 X 0.7 in.)
      Destination Package for Australia, China and Others 309 X 10 mm (12.2 X 0.4 in.)
      Brake Control System Standard Equipment Models for Europe Vehicle Dynamic Integrated Management (VDIM) and Hill-start Assist Control
      Models for G.C.C. Countries VSC with EPS-VSC Integrated Control, and Hill-start Assist Control
      Optional Equipment Models for Europe VSC with EPS-VSC Integrated Control, and Hill-start Assist Control
      Models for G.C.C. Countries Vehicle Dynamic Integrated Management (VDIM) and Hill-start Assist Control

      *: Diameter X Thickness