QUARTER WHEEL HOUSING OUTER PANEL ASSEMBLY REPLACEMENT

A004BUX


  1. REMOVAL

    Symbol Meaning
    B0049KO Remove Weld Points
    B0049JM Remove Weld Points
    B0049K7 Remove Weld Points

    1. Roughly cut open the panel so that the adhesive can be reached. Cut through the adhesive with a cut chisel to remove the panel.

      Tech Tips

      In cases where the adhesive cannot be removed with a cut chisel, heat the adhesive with an industrial heater gun or gas burner taking care not to cause panel deformation by overheating.

      A004BWOC01
      *A LH - -
      B0049J8 Adhesive - -
      A004BN7C01
      *A LH - -
    2. Roughly cut open the panel so that the adhesive can be reached. Cut through the adhesive with a cut chisel to remove the panel.

      Tech Tips

      In cases where the adhesive cannot be removed with a cut chisel, heat the adhesive with an industrial heater gun or gas burner taking care not to cause panel deformation by overheating.

      A004BXNC01
      *A RH - -
      B0049J8 Adhesive - -
      A004BV8C01
      *A RH - -
  2. INSTALLATION

    Symbol Meaning
    B0049K5 Plug Weld
    B0049K1 Plug Weld
    B0049IB Plug Weld
    A004BX8 Cut and Join Location
    A004BS3 Assembly Mark

    1. Apply adhesive (3MTMAutomixTMPanel Bonding Adhesive #8115).

      Tech Tips


      • Apply a light coat of adhesive around the plug welding points.

      • Apply enough adhesive to the panels.

      A004BWOC01
      *A LH - -
      B0049J8 Adhesive - -
    2. For positioning of the new parts, align the installation standard holes of the outer panel and the inner panel.

      A004BW5C01
      *A LH - -
      *1 QUARTER WHEEL HOUSE PANEL OUTER *2 ROOF SIDE PANEL INNER REAR
    3. Apply adhesive (3MTMAutomixTMPanel Bonding Adhesive #8115).

      Tech Tips


      • Apply a light coat of adhesive around the plug welding points.

      • Apply enough adhesive to the panels.

      A004BXNC01
      *A RH - -
      B0049J8 Adhesive - -
    4. For positioning of the new parts, align the installation standard holes of the outer panel and the inner panel.

      A004BVPC01
      *A RH - -
      *1 QUARTER WHEEL HOUSE PANEL OUTER *2 ROOF SIDE PANEL INNER REAR
    5. After welding, apply body sealer and undercoating to the corresponding parts. (See the painting/coating)

    6. After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.