CAUTION / NOTICE / HINT
Tech Tips
Use the same procedure for the RH and LH sides.
The procedure listed below is for the LH side.
PROCEDURE
DISPOSE OF BACK DOOR STAY ASSEMBLY LH
Horizontally hold the hood support in a vise with the piston rod pulled out.
Wear safety glasses. Gradually cut a part between A and B shown in the illustration using a metal saw to release the gas.
| Area | Measurement |
|---|---|
| A-B | 80 mm (3.1496 in.) |
Note
Although the gas inside the hood support is colorless, odorless and harmless, there is a possibility that metal debris could scatter. Therefore, cover it with a piece of cloth or other material.