HYBRID CONTROL SYSTEM VEHICLE CONTROL HISTORY


  1. VEHICLE CONTROL HISTORY (HYBRID CONTROL SYSTEM)


    1. Connect the GTS to the DLC3.

    2. Turn the power switch on (IG).

    3. Turn the GTS on.

    4. Enter the following menus: Powertrain / Hybrid Control / Utility / Vehicle Control History.


      Powertrain > Hybrid Control > Utility
      Tester Display
      Vehicle Control History
      Tester Display Measurement Item Diagnostic Note
      Battery Smart Unit Mismatch Displays if the wrong type of battery voltage sensor is installed. -
      Charge / Discharge Control Value Limit by Battery Temperature

      History of HV battery charge/discharge being restricted

      If the temperature of the HV battery becomes approximately 44°C (111.2°F) or higher due to high ambient temperature, continuous driving under high load, clogged hybrid battery intake duct, etc., the HV battery current will be restricted.

      In this case the value of WIN/WOUT will decrease and the engine will stop and start less frequently.


      • Check for clogs in the hybrid battery intake duct.

        Click here

      • This Vehicle Control History item may be stored if the temperature of the HV battery became high due to certain conditions, such as if the ambient temperature was high or the vehicle was driven continuously under high load.

        Explain to the customer that this is not a malfunction.

  2. VEHICLE CONTROL HISTORY (SRS AIRBAG)

    Tech Tips

    A part of the control history can be confirmed using the vehicle control history.

    Click here