PARKING BRAKE SYSTEM ADJUSTMENT


  1. ADJUST PARKING BRAKE SHOE CLEARANCE (CENTER PARKING BRAKE)


    1. Turn the shoe adjuster counterclockwise until the brake shoes are fully expanded.

    2. A01KGPME01
      Text in Illustration
      *a Contracted

      Turn the shoe adjuster clockwise 1 notch.

    3. With the parking brake pulled its full distance, check that the drum is locked.

    4. Release the parking brake lever and ensure that the parking brake is not dragging.

      Tech Tips

      If it is dragging, turn the shoe adjuster clockwise another notch.

  2. ADJUST REAR DRUM BRAKE SHOE CLEARANCE (REAR WHEEL PARKING BRAKE)


    1. Remove the shoe adjusting hole plug from the backing plate.

    2. Using a screwdriver, turn the adjusting nut until the wheel locks.

    3. A01KIIZ

      Turn the adjusting nut in opposite direction and make the shoe shrink to so that the drum can rotate easily. (w/ Automatic adjuster)

    4. A01KFJHE01
      Text in Illustration
      *a Expand
      *b Contract

      Turn the adjusting nut until the wheel turns freely. (w/o Automatic adjuster)

      Standard number of notches to be backed off
      5 notches
    5. Install the shoe adjusting hole plug to the backing plate.

  3. INSPECT PARKING BRAKE LEVER TRAVEL


    1. Pull the parking brake lever all the way up, and count the number of clicks at 250 N (25kgf, 55 lbf).

      Center parking brake
      6 - 8 clicks
      Rear wheel parking brake
      4 - 6 clicks
    2. If incorrect, adjust the parking brake.

  4. REMOVE PARKING BRAKE HOLE COVER

  5. ADJUST PARKING BRAKE LEVER TRAVEL

    A01KFFCE01
    Text in Illustration
    *1 Adjusting Nut
    *2 Lock Nut

    1. Loosen the lock nut and turn the adjusting nut until the lever travel is correct.

    2. Fix the adjusting nut and tighten the lock nut.

      Torque:
      7.8 N*m  { 80 kgf*cm, 48 in.*lbf }
    3. Check whether parking brake drags or not.

    4. When operating the parking brake lever, check that the brake indicator light lights up.

  6. INSTALL PARKING BRAKE HOLE COVER