SKID CONTROL ECU (for 1KD-FTV) INSTALLATION


  1. INSTALL SKID CONTROL ECU ASSEMBLY


    1. Connect the 2 connectors.

    2. Attach the 2 claws to install the skid control ECU.

    3. Install the ECM bracket with the 4 screws.

      Torque:
      3.0 N*m  { 31 kgf*cm, 27 in.*lbf }
  2. INSTALL ECM


    1. Install the No. 1 ECM bracket with the 2 screws.

      Torque:
      3.0 N*m  { 31 kgf*cm, 27 in.*lbf }
    2. Install the No. 2 ECM bracket with the 2 screws.

      Torque:
      3.0 N*m  { 31 kgf*cm, 27 in.*lbf }
    3. Connect the 6 connectors to the ECM.

    4. Install the ECM with the 3 screws.

      Torque:
      3.0 N*m  { 31 kgf*cm, 27 in.*lbf }
  3. INSTALL CENTER LOWER INSTRUMENT COVER


    1. Attach the 3clips to install the lower center instrument cover.

    2. Install the 2clips and 2bolts.

  4. INSTALL LOWER INSTRUMENT COVER


    1. Attach the 5clips to install the lower instrument cover.

    2. Install the clip and bolt.

  5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Torque:
    6.4 N*m  { 65 kgf*cm, 57 in.*lbf }