INSTALL OIL SEAL
Using SST and a hammer, tap in the oil seal.
INSTALL O-RING
Apply the engine oil on a new O-ring and install the O-ring to the casing.
INSTALL VACUUM PUMP SHAFT
Using a press, install a new bearing to the pump shaft.
Install the pump shaft and oil seal stop ring to the casing.
INSTALL VACUUM PUMP BLADE A
Install the rotor and pump blades A with the round end facing outward.
Install the pump end cover with the 2 screws.
INSTALL STOP RING
Install the stop ring with the 4 screws.
INSTALL CHECK VALVE SUB-ASSEMBLY
Using soft jaws on the vise, place vacuum pump in vise, install a new gasket, and check valve.
INSTALL VACUUM PUMP UNION
Install vacuum pump union with union bolt and 2 new gaskets.
INSTALL VACUUM PUMP PULLEY
Install the pulley and pulley lock nut .